Haier LE50K9000UA User Manual

Contents

3. Enter Channel Scan, where UPC is the local operator,and the default Scan Mode is Full; Others have Advance,Quick and Full Scan modes.Single RF Scan: manual search station.Satellite1.Menu->Settings->Channel->Channel Installation Mode,select Satellite.2. Enter Menu->Settings-> channel-> Channels->SatelliteRe-scan.3. Press OK to enter Satellite parameter Settings,which include LNB POWER, LNB Frequency,DiSEqC Set, 22K and other parameters. Thenreturn to Satellite re-scan and right click to enterthe search menu.Then return to Satellite re-scanand right click to enter the search menu.Satellite AddAdd a star broadcast signal.Satellite Manual Tuning: manually search fora certain TP, which can be added by SatelliteAdd if needed.11AntennaSalellite

/ 22

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

The operating instructions for the Haier LE50K9000UA can be found on page 6 of the user manual.

To turn on the Haier LE50K9000UA TV, first ensure the stand is installed and the TV is placed on a solid surface. Then, connect the antenna cable or cable TV cable to the ANT IN aerial socket on the back of the TV. Finally, plug the power cord into a working power outlet and press the power button on the remote control or the TV itself.

To turn on the TV using the buttons on the device, press the middle button when the TV is in standby mode.

To connect a DVD player to the Haier LE50K9000UA TV, you can use the YPbPr (Component) input terminal. Connect the corresponding cables from the DVD player to the YPbPr input on the TV.

To play a multimedia file, press the 'play' button on the remote control.

To set up the basic settings on your Haier LE50K9000UA TV, follow the Text Tip for First Time Setup. This will guide you through the initial configuration process.

To switch between different input sources, you can either go to the HOME interface, press the 'Inputs' icon, and select the desired input, or press the SOURCE button under live TV to display the list of input sources and select the desired source.

To adjust the brightness and contrast settings, press the / button to select the option. Press to decrease the parameter or press to increase the parameter.

To adjust the sound settings, navigate to the 'Sound' menu. Use the / button to select the desired option (e.g., Sound style, Balance, Bass, Treble, Sound Surround, Equalizer Detail, Speakers, Digital Output, SPDIF Delay, Auto Volume Control, Downmix Mode) and press the OK button to enter the sub-menu. Use the / button to decrease or increase the parameters as needed.

To reset all sound settings to the factory defaults, navigate to the 'Sound' menu and select 'Reset to Default'. Press the OK button to confirm and reset all settings to their original factory defaults.

Related manuals for Haier LE50K9000UA