The resolution of the Haier LE50K6000SF TV is 1920x1080 pixels.

The response time of the Haier LE50K6000SF TV is 20 milliseconds (Gray to Gray).

The main board is located on the A Board, as indicated in the service manual.

The Main Board processes signals received from external equipment and translates them into signals that the panel can display.

The MHL Port in the Haier LE50K6000SF is used for connecting devices that support Mobile High-Definition Link (MHL) technology, which allows for the transmission of high-definition video and audio content from mobile devices to the TV.

The System XTAL component in the Haier LE50K6000SF has a frequency of 24MHz and is of the DIP type. The crystal frequency offset should be less than 30PPM. Additionally, the component is associated with resistors R248 (1K) and R249 (100K), and capacitors C266 and C267 (both 12pF/50V/NPO).

The LVDS CONNECTOR in the Haier LE50K6000SF is used for connecting various signal lines such as RXO0+, RXO1+, RXO2+, RXOC+, RXO3+, RXO4+, RXE0+, RXE1+, RXE2+, RXEC+, RXE3+, and RXE4+. These lines are essential for the proper functioning of the display panel.

The TUNER_SCL and TUNER_SDA pins in the Haier LE50K6000SF are likely used for communication with the tuner module. These pins are part of the I2C (Inter-Integrated Circuit) interface, which is commonly used for communication between integrated circuits in electronic devices. The specific functions include serial clock (SCL) and serial data (SDA) lines, which facilitate data transfer between the tuner and the main control unit.