Haier LE46F2280 Manual
 OPERATIONOPERATION-12-1) CC Mode: Switch the closed caption mode.2) Advanced selection: only available in ATSC.3) Option: Used to edit the CC font.Note:1) Restore Default: Restore Default will clear all theprograms and reset all the settings to default value.CanadaCanada EngMENU OKCanada FreAnd use the ENTER key to lock/unlock.ParentalControlsRating Content FV(Fantasyviolence)V(Violence)S(Sexualsituation)L(Adultlanguage)D(Sexuallysuggestivedialog)SuggestedageTV-Y (Allchildren)TV-Y7(Direct toorder children)TV-G(Generalaudience)TV-PG(ParentalGuidancesuggested)TV-14(Parentsstronglycautioned)TV-MA(Matureaudience only)XXXXXXXXXXXXContent2) MPAA: Switching the movie-rating control level;N/A, G, PG, PG-13, R, NC-17, X.Rating DescriptionAgeG General audiences, All Ages admittedPG Parental Guidance suggested. Some material may not beSuitable for children.PG-13 Parents strongly cautioned. Some material .may beInappropriate for children under 13.RNC-17XRestrict. Under 17 requires accompanying parent or adultguardian(age varies in some jurisdictions)No one 17 and under admitted.X is an older rating that is unified with NC-17 but may beencoded in the data of older movies.1) Canada English: Switching the English rating controllevel: EXEMPT, C, C8+, G, PG, 14+, 18+.5. LOCK MENUIn this menu, you can change the password and adjustthe vchip settings.Enter the password, to enter the lock menu. Thefactory default password is 0000.5.1 Change Password1) Old password: Input the old password.2) New password: Input the new password.3) Confirm password: Input the new password again.5.2 System LockWhen the System Lock option is ON, the options listedbelow can be adjusted.5.3 USPress ENTER to display the following screen.1) TV: Press ENTER to display the following screen.5.4 CanadaPress ENTER, to display the following screen.MPAATVMENU OKSystem LockUSCanadaRRT SettingChange PasswordOff< LockResel RRT |
Questions and answers
Need help?
Ask question about this manual
Frequently asked questions
The instructions for assembling the base stand can be found on page 5 of the manual.
If your TV has been exposed to rain or moisture, you should unplug it immediately and refer it to qualified service personnel for servicing. Do not attempt to use or repair it yourself.
It is advisable to disconnect the AC power cord from the AC outlet to prevent any potential hazards.
Adequate ventilation is essential to prevent failure of electrical components. Blocking the ventilation holes can cause the TV to overheat, which can lead to damage or failure of the electrical components.
The power consumption of the Haier LE46F2280 TV is 98W.
To adjust the volume, use the 'VOL+' or 'VOL-' buttons on the remote control. These buttons will increase or decrease the sound level, respectively.
To connect your computer to the Haier LE46F2280 TV, follow these steps: 1. Ensure both the TV and computer are powered off. 2. Connect a VGA and audio cable from the computer to the TV. 3. Connect the power cord to the TV. 4. Turn on the TV and switch to PC mode. 5. Turn on the PC.
You can connect a Blu-ray player to your Haier LE46F2280 TV using one of the two HDMI ports located on the back of the TV. Simply use an HDMI cable to connect the Blu-ray player to one of the HDMI ports (HDMI1 or HDMI2).
To adjust the picture settings, go to the 'Picture Menu'. Use the arrow keys to select the option you want to adjust, such as contrast or brightness, and then press ENTER to make changes. Note that to adjust contrast, brightness, color, and sharpness, the picture mode must be set to personal.
To switch between Air TV signal and cable TV signal, go to the 'Air/Cable' option in the menu and select the desired signal type.
Related manuals for Haier LE46A2280
