Haier LE43B9200WB User Manual

Please refer to the Installation section on page 6 of the manual for detailed instructions on how to properly install your Haier LE43B9200WB TV.

For troubleshooting issues related to the remote controller, please refer to the Trouble shooting section on page 17 of the manual.

The resolution of the Haier LE43B9200WB TV is 1920 x 1080 pixels.

The Haier LE43B9200WB TV supports the following audio and video inputs: PC AUDIO x 1, VGA x 1, AV, COAXIAL x 1, and HEADPHONE x 1.

To switch between different input sources, use the SOURCE MENU button on your remote control. This will allow you to select from various inputs such as PC AUDIO, VGA, Y/Pb/Pr, RF, HDMI1, HDMI2, HDMI3, USB, VIDEO/L/R, COAXIAL, and HEADPHONE.

The SOUND MENU allows you to adjust sound effects such as treble, bass, and balance. To access it, go to the MENU and select the SOUND MENU. Use the arrow buttons to move and the OK button to enter and make changes.

To delete a channel from your favorites list, press the RED button on your remote control while the channel is selected.

To set up your favorite channels, press the FAV button on your remote control. This will allow you to select and store your preferred channels for quick access.

Use the direction keys to select different items in the hotel mode menu. To confirm your selection, press the 'OK' key or the right direction key.

If there is no picture on your TV, first check if the power cord is properly inserted and the power switch is turned on. Additionally, inspect the contrast, brightness, and volume settings. You can also press the standby key on the remote control to see if the TV responds.