Haier LE43B7600A Service Manual

Also see for LE43B7600A:

49TP403C40251uF 10VLEDBAR_PWRENBIN1CVBS2GIN1NIR-in15 IR-inR4157 0R05 1/16WUART-RX9,15I2S_MCLK 13I2S_SCLK 13I2S_LRCLK 13I2S_SD0 13UART-TX9,15UART-RXUART-TXSD-CLKSPDIF_INZD410 NC/AZ5123-01H 12ZD411 NC/AZ5123-01H 12Lighting LOGOC409115PF50VAUVRMPM_SPI_DIC4026 2.2uF 6.3VVCOM0+5V_NormalCVBS_OUTR4174 1K 1/16W 5%R41754.7K 1/16WZD404 AZ5123-01H 12PM_RXSD-CDZZD402 NC/AZ5123-01H 12ZD401 NC/AZ5123-01H 12R4158 0R05 1/16WQ408MTP3401N3ZD400 NC/AZ5123-01H 12R4072 4.7K 1/16WDVDD_NODIESY STEM-RSTVSENSE_MIPS+5V_StandbyEMMC_CLKC4170 NCUSB_PW_ENC4171 NCFor VB1U400BMSD8560VXRIN0PN3GIN0MM2GIN0PM1BIN0PM3HSYNC0N5VSYNC0N4RIN1PP1GIN1MP3GIN1PN2BIN1PP2CVBS0R3CVBS2R2CVBS_OUT1R1VCOMT3LINEIN_L0 R7LINEIN_L1 T8LINEIN_L3 T6LINEIN_R0 R5LINEIN_R1 T7LINEOUT_L0 U6LINEOUT_R0 U7EARPHONE_OUTL P6EARPHONE_OUTR R6VAG U4AVSS_VRM U5I2S_OUT_BCK E7I2S_OUT_MCK D5I2S_OUT_SD D6I2S_OUT_WS E6SPDIF_IN (EJTAG)) F7SPDIF_OUT D7I2S_IN_BCK / (NC) H11I2S_IN_SD / (NC) J12I2S_IN_WS / (NC) H12LINEIN_R3 T5PCMCIA & TSR406122 OHM 1/16WXTALOR40631M 1%C409015PF50VR4008 4.7K 1/16WR4007 4.7K 1/16WSD-D3A4PA4MA0MA1MA1PA0PA2MACKMA2PA3PACKPA3MPM_TXPM_RXU400CMSD8560VXTS0_D[0]AA2TS0_D[1]AA4TS0_D[2]Y 3TS0_D[3]Y 4TS0_D[4]W5TS0_D[5]AB3TS0_D[6]W4TS0_D[7]AB1TS0_CLKAB2TS0_SYNCAA3TS0_VLDAB4TS1_D[0]Y 13TS1_D[1]Y 14TS1_D[2]AA12TS1_D[3]Y 15TS1_D[4]AA13TS1_D[5]AB13TS1_D[6]AA14TS1_D[7]AB14TS1_SYNCAA15TS1_VLDY 16TS1_CLKY 17EMMC_CLK / (NAND_DQS)AE17EMMC_CMDAC16EMMC_RSTNAE16NAND_ALE(SPI_CK-NONPM)AC14NAND_CEZAD15NAND_CEZ1AD16NAND_CLEAD14NAND_RBZ(SPI_DO-NONPM)AE14NAND_REZ(SPI_DI-NONPM)AC13NAND_WEZAE13NAND_WPZAC15 PCM2_RESET(SD_CLK) AA16PCM2_WAIT_N[SD_CMD) AB16PCM_A[0] AB8PCM_A[1] AE8PCM_A[2] AD8PCM_A[3] AD9PCM_A[4] AC9PCM_A[5] AE10PCM_A[6] AE11PCM_A[7] AD11PCM_A[8] Y10PCM_A[9] AA9PCM_A[10] AA10PCM_A[11] Y9PCM_A[12] AC11PCM_A[13] Y11PCM_A[14] Y12PCM_D[0] AA5PCM_D[1] W8PCM_D[2] AA6PCM_D[3] Y5PCM_D[4] W7PCM_D[5] Y6PCM_D[6] AA7PCM_D[7] AA8PCM_CD_N AA11PCM_CE_N AD12PCM_IORD_N AC12PCM_IOWR_N AB11PCM_IRQA_N AB10PCM_OE_N AD13PCM_REG_N AC8PCM_RESET AC10PCM_WAIT_N AD10PCM_WE_N Y8Close to MST ICwith wide traceSY S_RSTR4053NC / 100K 1%C4064100NF 25VC4086100NF 25VGPIO Pull Up/Down+3.3V_StandbyU402G690H293T73GND 1RESET 2Vcc3VSENSE_VSS place a VIAC4014 2.2uF 6.3VDVDD_DDR_DECAPR4173100K1/16WR4037100K 1%C4008 10UF 6.3V 20%Close to MTS ICSD-D1CrystalSD-D0SD-D2XTALIXTALOVDDP_3318MDI_TPMDI_TNMDI_RPFB408 120R1 2MDI_RNFB404 120R1 2USB1_D+Power_DetectUSB1_D-C4009 10UF 6.3V 20%AMBI_SCL 15AMBI_SDA 15C4050 100NF 25VHP_L 8HP_R 8LED_R(LED_B):H = LED OFFL = LED ON+3.3V_NormalC4005 NC/100NF 25VC4051 100NF 25VC4027 100NF 25VC4052 100NF 25VC4006 NC/100NF 25VHDMI1-HPDINR415122R 1/16W 5%+3.3V_NormalTP418(Schematic change)埃ARC_on/off net.穝糤TP418.C4024 2.2uF 6.3VC4054 NC/22P 50VC4055 NC/22P 50VC4018 100NF 25VC4010 100NF 25VEMMC_D0R4068 NC/4.7K 1/16W+3.3V_NormalEMMC_D3Close to MTS ICEMMC_D2EMMC_D7EMMC_D4EMMC_D5EMMC_D6EMMC_D1EMMC_RSTZEMMC_CMDRC is for EMIC4028 100NF 25VLS-SDALS-SCLTS_D116TS_D216TS_D316TS_D416TS_D616TS_D516Close to MST ICwith wide traceTS_D716CN404CONN 2P123 4TS_D1AUVAGC4019 100NF 25VTUNER I2CC4029 100NF 25VBT_RST 10TS_D2C4165NC/33P 50VAM_LAM_RR4004 4.7K 1/16WD400BAT54CH312R4005 4.7K 1/16WLED-BKEY0KEY1IRTS_D3R4006 4.7K 1/16WKEY0-inSy stem-RSTCN402CONN24681013579+3.3V_Normal+3.3V_StandbyLED-RWIFI_RST 10R4147 2.2K1/16WC4020 100NF 25VTS_D4R4149 NC/4.7K 1/16WC4160 2.2uF 6.3VKEY0-AMBI15Standby Power 3.3VR4009 NC/100OHMTS_D5C406110UF 6.3V 20%C4062100NF 25VR4148 NC/4.7K 1/16WHS400HEAT SINK12TS_D6FB406 120R1 2M_SCLC4021 100NF 25VM_SDATS_D73D_EN3D_ENFor DVB-TI2S-MCKFB405120R 3A12only 4L socket boardplace test point andresistorX90G071110100000SYX90G071110100000BFFootprint :90A0711-101XC40022.2uF 6.3VHDMI3-RX0NC4159 1nF 50VHDMI2-RX1N11HDMI2-RX0PHDMI2-CLKP11HDMI2-RX0P11HDMI2-RX2P11R4191 0R05 1/16WHDMI2-RX1P11HDMI2-RX0NHDMI3-RX1NR4192 0R05 1/16WHDMI2-HPDIN11HDMI2-CLKN11Heat sink﹚璶ְך Test pin!HDMI2-RX2PHDMI2-CLKNHDMI2-RX0N11HDMI2-RX2N11HDMI2-SDA11HDMI2-CLKPHDMI2-HPDINHDMI2-SCLHDMI2-SCL11HDMI2-RX2NHDMI2-RX1NHDMI2-RX1PHDMI2-SDALED_RC4166 NC/33P 50VC4158 1nF 50VC4022 100NF 25VPWM_PMR4156 0R05 1/16WR4066 4.7K 1/16WIF_AGC_1 12MHL_CABLE_DETR4172 0R05 1/16WDDR3 POWERR4170 0R05 1/16WC4004 100NF 25V垂砰熬惠ֹל 30PPMBRI_ADJC4023 100NF 25VAll I2S trace need to shield GNDAM_RC4011 100NF 25VAM_LC4163NC/33P 50VAGC_SEL 12R4196 0R05 1/16WIRR415222R 1/16W 5%(Schematic change)埃UART_SEL_MCU net.穝糤MHL_CABLE_DET net.+12V_Normal(Schematic change)穝糤R4196(腹:061G0402000 JT)穝糤R4197 (NC) (腹:061G0402000 JT)穝糤AGC_SEL net(Component change)盢R4171パ0R(腹:061G0402000 JT)эNCDIF1-PDIF1_MDIF1-MI2S-BCKSPDIF_IN㏕﹚暗3D_LR_Flag块倒6M30DIF1_PRC is for EMIC4012 100NF 25VR4059100K 1%DIF1-PDIF1-MYPbPr_Y8TO IR/KEY BOARDYPbPr_PR8C4067100NF 25VYPbPr_PB8AV2_IN8C4082 NCT_SCL 12CVBS_OUT8R4032 10 OHMT_SDA 12IR-inConnectorR4024 6K8 1/10W 1%+3.3V_StandbyC4079 100N 50VLED-BR40461M 1%C4077100NF 25VR4033 100R 1/16W 1%C4069 NC/33P 50VDIF1_P 12DIF1_M 12C4013 100NF 25VR4031 10 OHM(Schematic change)盢CN400(NC) (腹:311GW200C14BBX)簿埃盢R4185(NC) & R4186(NC)簿埃(腹:061G0603000 JY)Power_DetectKEY0-in+3.3V_StandbyLEDRVBL_CTRLRC is for EMILINE_IN_3LC4081 100pF 50VC4080 100N 50VC4068100NF 25VC4084 NCR4039 100R 1/16W 1%C4007 100NF 25VR4026 10K 1%LINE_IN_3RLEDBR4038 100R 1/16W 1%R4052100K 1%R4067 NC/4.7K 1/16WC4070 NC/33P 50VLED-RFB409 120R1 2R4071 4.7K 1/16WR415322R 1/16W 5%R4025 6K8 1/10W 1%R4163 NC/4.7K 1/16WR4164 NC/4.7K 1/16WR4001 4.7K 1/16W3D Sync Modulation+3.3V_StandbySPDIF_OUT 8C4071 NC/33P 50VUSB3_SSTXNUSB3_SSRXPUSB3_D+USB3_D-USB3_SSRXNUSB3_SSTXPFB410 120R1 2R4070 NC/4.7K 1/16WC4072 100P 50VC4167 NC/33P 50VLEDBAR_PWRENC4030 2.2uF 6.3VAMP-MUTELED_RFB411 120R1 2HD_LinHD_Rin HD_Lin 8HD_Rin 8VDDC_CPUVDDCSPDIF_OUTForAudioFB401 120R1 2FB403 120R1 2Q407MMBT3904C4164NC/33P 50VDVDD_DDR AVDDL_USBAVDDL_MOD VDDCVDDCC4001100NF 25VRST_AMP 13I2S_MCLKI2S_SCLKI2S_LRCLKI2S_SD0AVDDL_DVIC4162NC/33P 50VC4057 47NF 16VIR Board:715G7437KeyPadBoard:715G7436R4176 NC/0R05 1/16WC4058 47NF 16VC4059 47NF 16VC4043 2.2uF 6.3VR41930R05 OHMR41940R05 OHMR4195NC/0R05 OHMC4056 47NF 16VC4175NCC4176NCIF_AGC_1C4174NCHDMICHIP_CONFIG[2:0]{PAD_PM_SPI_DI, PAD_LED_R, PAD_PWM_PM}Value Mode Description3'b000 SB51_Ex tSPI 51 boot from SPI3'b001 HEMCU_ExtSPI ARM boot from SPI3'b010 HEMCU_ROM_EMMC ARM boot from ROM; outer storage is eMMC3'b011 HEMCU_ROM_NAND ARM boot from ROM; outer storage is NAND3'b100 DBUS for test onlyLIGHT_LOGOC406633P 50VTP406R4019 33 OHM 1/16WSOURCE INPUTR4188NC/0R05 1/16WSD-D0 14R4187NC/0R05 1/16WSD-D1 14SD-D2 14C4161NC/33P 50VT_SDAT_SCLX40024MHZ1243C4063 47NF 16VR4020 68OHM 1/16WR4155 0R05 1/16WC4065 47NF 16VEMMC POWER DETECTR4017 33 OHM 1/16WR4179 0R05 1/16WR4181 NC/0R05 1/16WR4180 NC/0R05 1/16WR4178 0R05 1/16WKEY1-inLIGHT_LOGORST_AMPR4015 68OHM 1/16WR415022R 1/16W 5%USB2_D+ 10USB2_D- 10USB2_D-C4053 2.2uF 6.3VR4016 33 OHM 1/16WLINE_IN_3RR4054NC/0R05 OHMLIGHT_SENSORR4169NC/0R05 OHMR4159 NC/0R05 1/16WUSB2_D+R4014 33 OHM 1/16WR41680R05 OHMSYSTEM I2CC4031 2.2uF 6.3VAVDD5V_MHLHDMI InterfaceAVDD_DDRAVDDL_MODAVDD_AU33FB402 120R1 2砞璸筿隔璶―:SAR5タ盽筿溃莱1VEMI solution+3.3V_NormalAVDD3P3_DMPLLVDDP_3318AVDDL_USBVDDCDVDD_DDRVDDC_CPUAVDDL_DVIAVDD3P3_MPLLPM_SPI_DIC4000100NF 25VLINE_IN_3L+3.3V_Normal+3.3V_StandbyClose to MTS ICPANEL_ON/OFFHDMI1-RX0P11HDMI-CEC11HDMI1-CLKP11HDMI1-RX1N11HDMI1-RX0N11HDMI1-SCL9HDMI1-RX2P11HDMI1-CLKN11R4154 0R05 1/16WHDMI3-RX2N11HDMI1-SDA9M_SCLHDMI3-CLKP11HDMI1-RX2N11HDMI3-SCL11HDMI3-RX0P11HDMI3-RX1P11HDMI3-SDA11 R4002 4.7K 1/16WHDMI3-RX1N11HDMI3-RX0N11HDMI3-CLKN11HDMI3-RX2P11HDMI3-HPDIN11HDMI1-HPDIN11ZD409BZX84-C5V61 3R4184 NC/0R05 1/16WC4035 100NF 25VR4003 4.7K 1/16WHP_RHP_LC4036 100NF 25VC4172 NC/1nF 50VC4173 NC/1nF 50VR4182 NC/0R05 1/16WC4037 100NF 25VR4183 NC/0R05 1/16WHDMI1-RX1P11LIGHT_SENSORC4168 NC/33P 50VHDMI1-ARC9M_SDAM_SCLMDI_RN 10MDI_RP 10XTALIMDI_TP 10MDI_TN 10+1.5V_DDRUSB0_D+ 10+3.3V_TunerUSB0_D- 10Mode Selection3D_L/R_FLAG+3.3V_StandbyUSB1_D- 10USB1_D+ 10R4197 NC/0R05 1/16WUSB3_SSTXN 10USB3_SSRXP 10USB3_SSRXN 10USB3_SSTXP 10USB3_D- 10USB3_D+ 10MHL_CABLE_DET11EAR_DET 8STR_GPIO4PWR-ON/OFF4,10SD-CDZ14+3.3V_StandbyVBL_CTRL4AMP-MUTE13AVDD3P3_MPLLHDMI1-SDABRI_ADJ4SD-D314AVDD_AU33AVDD3P3_DMPLLPM_TXLED_BHDMI1-SCLHDMI-CECM_SCL4,7,13,15,16M_SDA4,7,13,15,16HDMI3-CLKNHDMI1-CLKN+3.3V_StandbyAVDD_DDRHDMI1-RX1NHDMI1-RX2PHDMI3-RX0PHDMI1-RX1PHDMI1-RX2N+3.3V_StandbyHDMI3-RX2NI2S-WSHDMI1-RX0PHDMI1-CLKPHDMI3-HPDINHDMI3-RX1PHDMI1-RX0NI2S-SDOHDMI3-RX2PHDMI3-CLKPHDMI3-SCLHDMI3-SDAAVDD5V_MHLHDMI1-ARCC4038 100NF 25VB0M 7B0P 7B1M 7B2M 7B1P 7B2P 7BCKP 7BCKM 7AM_L 8C4044 2.2uF 6.3VDELC4087,C4088,C4089,Q402,Q403,Q404,R4056,R4057,R4058,R4060,R4062,R4064,R4065,R4069,R4073,U403,ZD408B3M 7AM_R 8TS_CLK_SB4M 7B3P 7C4045 100NF 25VA0M 7B4P 7C4046 100NF 25VA0P 7A1M 7A1P 7C4047 100NF 25VA2M 7C4048 100NF 25VACKM 73D_EN4A2P 7ACKP 7A3M 7C4049 100NF 25VA3P 7R4171 NC/0R05 1/16WA4M 7A4P 7+3.3V_StandbyTS_SYNCR4055NC/0R05 OHMEMMC_CMD14R4177 NC/0R05 1/16WEMMC_CLK14EMMC_RSTZ14C4016 10UF 6.3V 20%TS_VLDTS_CLK_S16TS_SYNC16TS_VLD16B1MB0MB2MB1PB0PB4MBCKMB3MB2PB3PBCKPPWM_PMB4PSD-CLK 14detect EMMC/NAND Flash PowerI2S-MCKI2S-SDOI2S-BCKI2S-WSOEM MODEL SizeRevDate Sheet ofTPV MODELPCB NAME 称爹T P V ( Top Victory Electronics Co . , Ltd. )Key Component絬隔瓜絪腹 ACustom5 16Thursday , April 02, 2015 <称爹>19. POWER ITS_D016 TS_D0C4032 100NF 25VPANEL_ON/OFF7USB_PW_EN4,10EMMC_D714EMMC_D014EMMC_D314U400DMSD8560VXA_RX0NJ2A_RX0PK3A_RX1NK2A_RX1PL3A_RX2NL2A_RX2PL1A_RXCNJ3A_RXCPJ1DDCDA_CKF6DDCDA_DAC5HOTPLUGAM4D_RX0NF2D_RX0PG3D_RX1NG2D_RX1PH3D_RX2NH2D_RX2PH1D_RXCNF3D_RXCPF1DDCDD_CKE2DDCDD_DAE1HOTPLUGDD3C_RX0NAD5C_RX0PAC6C_RX1NAD6C_RX1PAC7C_RX2NAD7C_RX2PAE7C_RXCNAC5C_RXCPAE5DDCDC_CKAC4DDCDC_DAAB5HOTPLUGCW3AVDD5V_HDMI_CAD4ARC0E3CECM5DM_P0 B5DP_P0 A5DM_P1 B6DP_P1 C6DM_P2 B7DP_P2 C7SSRXN AD3SSRXP AE3DM AD2DP AE2SSTXN AD1SSTXP AC1RN B3RP C3TN A2TP B2VIFM U1VIFP U2IFAGC V2TGPIO0(NC) V11TGPIO1(NC) V10TGPIO2(NC) W11TGPIO3(NC) W10EMMC_D114EMMC_D414EMMC_D614Bead ﹚璶綼秈DC-DC块狠!筿甧綼IC狠!EMMC_D514EMMC_D214LEDBAR_PWREN 15SD-WP14SD-CMD 14For VB1C4017 10UF 6.3V 20%C4003100NF 25VAll I2S trace need to shield GNDUSB0_D+R4189 NC/0R05 1/16WUSB0_D-FB407 1000R1 2SD-WPR4190 NC/0R05 1/16WSD-CMDC4033 100NF 25VR40301K 1/16W 1%R402310KR41461.2K 1/16W 1%Q400MMBT3906FB400 120R1 2RESETDemod-RST 16VDDCRIN1GIN1LEDRU400AMSD8560VXGPIO_PM[0]P4GPIO_PM[1] / (PM_UART_TX)F5GPIO_PM[2] / (MHL_CDS)W2GPIO_PM[4] / (POWER_CTRL)N6GPIO_PM[5] / (PM_UART_RX)F4GPIO_PM[6] / (SPI_CS)Y7GPIO_PM[7] / (SD_CDZ)E5GPIO_PM[8] / (WOL)T2GPIO_PM[10]U3PM_LEDA4VID0Y2VID1C4SAR0C1SAR1D2SAR3C2SAR5(5V MONITOR)B1PWM_PMM6PWM0 / (SDIO_D[3])AC17PWM1AD18PWM2(NC)AA19DDCA_CKG4DDCA_DAG5DDCR_CKAC18DDCR_DAAD19RESETB4IRINE4XTAL_INY1XTAL_OUTW1G_ODD[2] / LVA0+ / LLV4+ AE23G_ODD[3] / LVA0- / LLV4- AD23G_ODD[0] / LVA1+ / LLV3+ AE22G_ODD[1] / LVA1- / LLV3- AC22B_ODD[6] / LVA2+ / LLVCK+ AC21B_ODD[7] / LVA2- / LLVCK- AD22B_ODD[4] / LVACLK+ / LLV2+ AC20B_ODD[5] / LVACLK- / LLV2- AD21B_ODD[2] / LVA3+ / LLV1+ AE20B_ODD[3] / LVA3- / LLV1- AD20B_ODD[0] / LVA4+ / LLV0+ AE19B_ODD[1] / LVA4- / LLV0- AC19R_ODD[6] / LVB0+ / RLV3+ AA25R_ODD[7] / LVB0- / RLV3- Y23R_ODD[4] / LVB1+ / RLVCK+ AA23R_ODD[5] / LVB1- / RLVCK- AA24R_ODD[2] / LVB2+ / RLV2+ AB23R_ODD[3] / LVB2- / RLV2- AB24R_ODD[0] / LVBCLK+ / RLV1+ AC25R_ODD[1] / LVBCLK- / RLV1- AC24G_ODD[6] / LVB3+ / RLV0+ AD25G_ODD[7] / LVB3- / RLV0- AC23G_ODD[4] / LVB4+ / LLV5+ AE24G_ODD[5] / LVB4- / LLV5- AD24LCK/ RLV4+ Y25LDE/ RLV4- Y24LHSY NC/ RLV5+ W23LVSY NC/ RLV5- W24TCON[0] AA18TCON[1] AB183D_FLAG / TCON[2] AA17PWM2 / TCON[3] AB17TCON[4] AB19TCON[5] AB20TCON[6] AB21PM_SPI_CZ(NC) J11SAR2D4PM_SPI_DI(HWSTRAP)N7GPIO3(EJTAG) W9R40491K 1/16W 1%+3.3V_Standby+3.3V_Standby+3.3V_StandbyM_SDAKEY 1KEY 0C4034 100NF 25VKEY1-inKEY0-inZD405 AZ5123-01H 12LED_RR40441.2K 1/16W 1%U400FMSD8560VXAVDDL_MODP15AVDDL_PREDRVP14AVDDLV_USBU12AVDDLV_USBU13DVDD_DDRN15DVDD_RX_1M14DVDD_RX_2M15VDDCT17VDDCU17VDDCT18VDDCU18VDDCU19VDDCV19VDDCV20VDDCW20VDDCV21VDDC_CPUP18VDDC_CPUR18VDDC_CPUP19VDDC_CPUR19VDDC_CPUT19VDDC_CPUT20VDDC_CPUU20VDDC_CPUT21VDDC_CPUU21VSENSE_MIPSN18VSENSE_VSSN17DVDD_NODIEG10TESTPING11GND_EFUSEG7AVDD_DDR0_CH15AVDD_DDR0_CKH16AVDD_DDR0_DH17AVDD_DDR0_DH18AVDD_DDR1_CJ17AVDD_DDR1_CKJ18AVDD_DDR1_DL18 AVDD_DDR1_DK18VDDP_3318M7AVDD_PLLM9AVDD_MODN8VDDPL8AVDD3P3_DMPLLH7AVDD3P3_DVIL7AVDD3P3_MPLLJ9AVDD3P3_USBL6AVDD_AU33G6AVDD_NODIEH6GND AC2GND AC3GND K4AVDD_EAR33J4AVDD3P3_LANJ6AVDD3P3_DADCJ5AVDDL_DVI_PCR13GND K5GND V5GND K6GND V6GND AB6GND A7GND K7GND F8GND G8GND K8GND P8GND R8GND U8GND V8GND G9GND H9GND K9AVDDL_DVI_PCR14DVDD_DDR_DECAPK16DVDD_RX_2_DECAPL17DVDD_RX_1_DECAPJ16VDDCW21AVDD_PLLN9AVDD_PLLN10 AVDD_PLLL10AVDD_MODM8VDDPL9VDDPM10GND P9GND T9GND U9GND J10GND R10GND U10GND B11GND F11GND K11GND L11GND M11GND N11GND P11GND R11GND T11GND U11GND K12GND L12GND M12GND N12GND P12GND R12GND V12GND W12GND C13GND G13GND J13GND K13GND M13GND N13GND P13GND T13GND U15GND V13GND W13GND C14GND G14GND H14GND J14GND K14GND L14GND V14GND F15GND G15GND J15GND K15GND L15GND V15GND W15GND G16GND L16GND M16GND U16GND V16GND W16GND A17GND F17GND M17GND W17GND AD17GND M18GND W18GND A19GND D19GND E19GND H19GND J19GND K19GNDY22 GNDW22 GNDV22 GNDU22GNDC22GNDR22GNDT22GNDY21GNDAA21GNDAA20GNDP21GNDN20GNDR20GNDY20GND L19GNDB20GNDG20GNDH20GNDL20GND J8GND K10GND T16GND P17GND Y18GNDP20GNDP22 GND V7GND L4GND L5GND J7GND H8GND B9GND H10GND W14GND B16GND R17GND V17GNDC21GNDR21GNDAA22GNDAB22GND T10GND W6GND A8GND R9GND A10GND T12GND F14GND T14GND B18GND F18GND V18GNDW19GNDY19GNDN19GNDE23GNDF23GNDN23GNDP23GNDR23GNDV23GNDA24GNDC24GNDH24GNDK24GNDM24GNDU24GNDV24GNDB25GNDJ25GNDL25GNDM19GNDJ20GNDK20GND F12GND F13GND L13GND T15GND N16GND P16GND R16GND V3GND V9GND P7GND P10GND G12GND H13GND G17GND G18GND N14GND K17GND R15GND V4GND U14+3.3V_Standby +3.3V_StandbyLED_B Q401MMBT3906R404510KLEDBR40511K 1/16W 1%LINEOUT_MUTE 8

/ 66

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

The recommended resolutions and frequencies for connecting a video device to the Haier LE43B7600A TV using an HDMI port are listed in the Default HDMI Mode section of the manual. For example, the recommended resolution is 1920 × 1080 with a horizontal frequency of 66.587 kHz and a vertical frequency of 59.934 Hz.

If your TV does not turn on, first check if the AC input is connected and the power is turned on. If the power is on, check if the power board is outputting 12V. If not, you may need to replace the power board. If the power board is functioning correctly, check the IR board and LED. If the IR board is faulty, you may need to replace it. If the issue persists, you might need to replace the main board.

If the LED indicator on your TV is off, follow these steps: Check the AC input and ensure the power is turned on. If the power is on, verify if the power board is outputting 12V. If the power board is not outputting 12V, replace the power board. If the power board is functioning correctly, check the IR board and LED. If the IR board is faulty, replace it. If the issue persists, you may need to replace the main board.

To troubleshoot a display issue, follow these steps: 1. Check the source. 2. Reset the source. 3. Enter factory mode and perform 'EEPROM initial' and 'Reset'. 4. Check the main board and replace it if necessary. 5. Check the LVDS cable and replace it if needed. 6. Check the panel and replace it if required.

If you suspect the IR board is causing issues with your remote control, you can check if it is abnormal. If it is, you will need to replace the IR board. If the IR board is fine, the issue might be with the main board, which would also need to be replaced.

To adjust the white balance, turn on the TV, then press 'MENU+1999+OK' to enter the factory mode. Set the current source to 'Ypbpr' and choose the color temperature as Warm, Normal, or Cool. Use the remote control to select 'WD Pattern' for 80, then adjust the R/G/B values using the Gain bar to meet the required specification range. Ensure that the MAX LV is greater than 220.

The color temperature specifications are as follows: Warm (x: 0.313 ± 0.003, y: 0.329 ± 0.003), Normal (x: 0.285 ± 0.003, y: 0.293 ± 0.003), and Cool (x: 0.272 ± 0.003, y: 0.278 ± 0.003). The MIN value for R GAIN, G GAIN, and B GAIN is 80, and the MAX value is 128.

The 12 Pin connector on the Power Board is used for connecting to the Main Board (MSD8560VX).

The WIFI Board is connected using the 16 Pin connector.

The GPIO Pull Up/Down configuration is used to set the default state of the GPIO pins. This can be crucial for ensuring that the pins are in a known state when the device is powered on or reset. For example, Y2 and C4 are configured as GPIO Pull Up/Down.

Related manuals for Haier LE43B7600A