Operation04 OPERATIONPasswordPlease enter old passwordPlease enter new passwordConfirm new passwordThe installation guide only appear when the TV first timeturn on or reset to factory set.Installation Guide1).Press the ▲▼ buttons to navigate the menu andchange the settings. Press the OK button to confirm.Select your desired language ,Home/Shop Mode to bedisplayed on the menu.2). Press the buttons to select DVB-T/DVB-C/ and then press the OK button to confirm.▲▼DVB-S2a. If you select DVB-T, the next step is to select the Tunetype and country then press the OK button to start tuning.b. If you select DVB-C, the next step is to config the DVB-Csystem like (scan type / Frequency/ Network ID/Symbol(KS/S) then press OK button to into the tune type andcountry select menu, this step is the same as DVB-T, selectthe tune type (DTV/ATV).Choose the right country, pressOK button to start tuning.Note: The default password is 0000.EN-17OKGreeceNederlandsGermanyPortugalPolandItalyHungaryLuxembourgNorwayHOME or Shop modes1.When the unit is turn on for the very first time, it willshow Initialization set-up menu. After the OSD languageis set, the user can choose between "shop mode" and"home mode".When the screen shows the following setting menu andthe cursor stays on the "home mode" choice, press ◀▶to adjust, and "OK" to enter the menu.Select the usage mode?shop mode is for shop usage only.Shop mode Home modeIf "Shop mode" is choosen, the following menu willdisplayed.Are you sure to change toShop mode?OK CancelPress "OK" to enter the next prompt menuShop mode is the most energy mode.OK CancelContinue?Choose "Cancel" to go back to the Initialization set-upmenu, and the cursor will stay at the "home mode"choice.choose it to go the next menu to choose the country.Please select an OSD languageOKEnglishFrenchItalianoSpanishDeutschNederlandsDVB-S2c. If you select DVB-S2, you may select to load defaultDVB-S2 channel list or select to start a new channelsearch.