Haier LE39F2280 User Manual

Please refer to the instructions provided on page 5 of the manual for detailed steps on assembling the base stand.

For troubleshooting tips, please refer to page 14 of the manual.

If the power cord or plug is damaged, you should unplug the TV and refer all servicing to qualified service personnel. Do not attempt to repair it yourself.

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls. Do not place your television on an unstable cart, stand, shelf or table.

The power consumption of the Haier LE39F2280 TV is 50W.

To change the input source, press the 'SOURCE' button on the remote control. This will display the input source menu, allowing you to select the desired input.

If your TV is not responding to the remote control, ensure that the remote control sensor on the front panel is not obstructed. Additionally, try pressing the 'STANDBY' button on the remote control to turn the TV on from standby mode, or use the panel keys on the TV itself to control the unit.

To connect your computer to the Haier LE39F2280 TV using a VGA cable, follow these steps: 1. Ensure both the TV and computer are powered off. 2. Connect a VGA cable from the computer to the VGA port on the TV. 3. Connect the power cord to the TV. 4. Turn on the TV and switch to PC mode. 5. Turn on the PC.

To adjust the volume, use the 'VOL+' or 'VOL-' buttons on the remote control. Pressing these buttons will increase or decrease the volume, respectively.

To adjust the picture settings, go to the Picture Menu. You can adjust options such as contrast, brightness, color temperature, VGA setting, aspect ratio, and noise reduction. Press the select button to choose an option and press OK to adjust it.