Haier LE39B7000C Instruction Manual

Also see for LE32B7000C:

Language

English

Contents

Français32

Deutsch63

Español121

Português181

Haier LE39B7000C Instruction Manual Manual pdf 15 page image

Operation04 OPERATIONThe First Time Setup screen will appear when the TV is first switchedon or reset to the factory setting.Installation Guide1).Press the ͩ Ʒ buttons to navigate the menu and buttonsto change the settings. Select your desired language ,Home/ShopMode to be displayed on the menu.2). Press the buttons to select AIR/Cable means DVB-T,DVB-C.If you select DVB-C, you will select Full or Quick way toscan.Also you can select Auto Scan mode. DTV+ATV orDTV only, or ATV only.First Time SetupOSD Language EnglishMode Setting Home ModeCountry GermanyStartAuto Scan DTV+ATVAntenna Type AirFirst Time SetupOSD Language EnglishMode Setting Home ModeCountry GermanyStartAuto Scan DTV+ATVAntenna Type CableCable Quick3). Channel tuning will commence. This operationmay take up to . The display will showthe progress of the tuning and the number ofchannels found.4). If you want to skip the DTV tuning, press theMENU button to interrupt the tuning half way.You will then go straight to ATV tuning.5). After tuning is complete, the channels arearranged in a preset order. If you wish to skip channels,modify the preset order or renamechannels, select P rogramme Edit under theC6). The old password is 0000, you can’t use 0000 as new7). If you select Italy here, this TV will not have USB recordingand Time Shift function.password.hannel menu.some minutes1. 1)Auto Tuning (DVB-T)1. CHANNEL MENU1). Press the MENU button and then press theͩ Ʒbuttons to select the CHANNEL menu and then pressthe OK button or Right button.2). Press the ͩ Ʒ buttons to select Auto Scan and thenpress the OK button.In the UK to connect to cable TV you will require theappropriate cable TV's company's 'set top box' to beconnected to the TV. Please refer to the cable TV'sinstructions manual for further details.EN-14HOME or Shop modes1.When the unit is turn on for the very first time, it will showInitialization set-up menu. After the OSD language is set, theuser can choose between "shop mode" and "home mode".When the screen shows the following setting menu and thecursor stays on the "home mode" choice, press to adjust,and "OK" to enter the menu.Select the usage mode?shop mode is for shop usage only.Shop mode Home modeIf "Shop mode" is choosen, the following menu will displayed.AreyousuretochangetoShopmode?OK CancelChoose "OK" to enter the next prompt menuShop modeisthemostenergymodeOK CancelContinue?Choose "Cancel" to go back to the Initialization set-up menu,and the cursor will stay at the "home mode" choice. choose it togo the next menu to choose the country.First Time SetupDTV Digital TVATV Analogue TV (not used in UK)

/ 209

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

To record a program, you need to prepare the recording by setting the desired program and time. Then, follow the instructions to record the program. The detailed steps can be found on page 20 of the manual.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. Additionally, do not drop or push objects into the television cabinet slots or openings, and never spill any kind of liquid on the television receiver.

To navigate the on-screen menu, use the 'OK' button to confirm selections and the 'SCREEN' button to open the menu.

To access a specific page using the teletext feature, press the 'TELETEXT' button on the remote control. Enter the 3-digit page number using the 0 to 9 keys. The number will be displayed at the top left of the screen, and the counter will turn before the page is displayed. If the counter continues to search, it means the page is not being transmitted, and you should select another number.

To set the Auto Sleep function, ensure it is turned on. The TV will automatically switch off after 15 minutes of no signal input if the Auto Sleep function is set to ON.

To access and play media files from a USB device, press the source key on your remote, select USB from the source list, and press the OK button. Ensure the USB device is plugged into the slot. You can select from four types of media items: photo, music, movie, and text. Use the arrow keys to navigate and the OK button to enter the disk selection menu. Select the media file by pressing the arrow keys and the OK button, and use the play/pause, previous, next, and stop keys to control playback.

If the USB device is not recognized, ensure that it is properly plugged into the slot. Check that the USB device is formatted correctly and contains compatible media files. If the issue persists, try using a different USB device or port to rule out any hardware issues.

If there is no picture on your TV, check the following: ensure the power cord is properly inserted, the power switch is turned on, and the contrast, brightness, and volume settings are correctly adjusted. Additionally, press the standby key on the remote control to inspect the issue.

If the picture on your TV is breaking up, try retuning the channel. This should help stabilize the picture quality.

Most PCs and laptops require you to press specific function keys (e.g., F7 for Dell, F4 for HP/Samsung, F5 for Toshiba) along with the 'Fn' key to display the picture on an external display. Ensure you are pressing the correct combination of keys for your device.

Related manuals for Haier LE32B7000C