Haier LE32K6000D Owner's Manual


Contents Table of Contents2 Safety and Warnings3 Introduction5 Base Stand Assembly6 Wall Mount Installation10 Installation11 Remote Control19 Operation20 Trouble Shooting27	LED LCD TVOWNER' S MANUALMODEL: L E 3 2 K 6 0 0 0 DL E 4 0 K 6 0 5 0 D PL E 4 0 K 6 0 0 0 DL E 4 3 K 6 0 0 0 DL E 5 0 K 6 0 0 0 DPlease READ this manual carefullybefore operating your TV, and retainit for future reference Next / 28

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

The instructions for assembling the base stand are provided on pages 5-8 of the manual.

The steps for wall mount installation are detailed on page 9 of the manual.

If the power cord or plug is damaged, you should unplug the TV and refer all servicing to qualified service personnel. Do not attempt to repair it yourself.

You can connect your PC to the Haier LE32K6000D TV using the HDMI interface, which has 3 ports available. Alternatively, you can use the Analog RGB (VGA) input.

Yes, the Haier LE32K6000D TV has a USB port, which allows you to play media files from a USB drive using the multi-media player function.

To assemble the base stand, place the TV with the display side down on a flat surface and use a cloth to protect the display. Locate the 2PCS of bottom bracket into the gap in the bottom of the TV. Lock 4PCS screws below and check each screw is firmly tightened. The screws are M4X12MM.

The angle between the TV and the wall must not be bigger than 3º.

To change the input source, press the 'SOURCE' button on the front panel or the remote control. This will display the input source menu, allowing you to select the desired input.

To adjust the volume, use the 'V+' or 'V-' buttons on the front panel or the remote control. These buttons will increase or decrease the sound level, respectively.

To mute the sound on your Haier LE32K6000D TV, press the 'Mute' button on the remote control.

Related manuals for Haier LE32K6000D