Haier LE32K6000B User Manual

Please refer to the 'Wall Mount Installation' section on page 5 of the manual for detailed instructions on how to install the TV on the wall.

The basic operations for the Haier LE32K6000B TV are detailed in the 'TV Operation' section on pages 11-14 of the manual.

If the power cord or plug of the Haier LE32K6000B TV is damaged, you should unplug the TV and refer all servicing to qualified service personnel. Do not attempt to repair it yourself.

Refer servicing to qualified service personnel. Do not attempt to remove the cabinet back from your set as high voltages are used in the operation of this television receiver.

Do not expose the television receiver to rain or moisture. Additionally, do not place the television on an unstable surface, and avoid blocking the ventilation holes in the back cover. Ensure adequate ventilation to prevent failure of electrical components.

To connect your PC to the Haier LE32K6000B TV, follow these steps: 1. Ensure both the TV and computer are powered off. 2. Connect the VGA and audio cables. 3. Connect the power cord. 4. Power on the TV and switch to PC mode. 5. Power on the PC. This sequence is crucial for proper connection.

To adjust the volume, use the VOL +/- buttons on the remote control. Pressing these buttons will increase or decrease the volume level.

To change the screen display mode, press the P.SIZE button on the remote control. This will allow you to switch between different display modes.

To adjust the clock, power on/off time, sleep time, and Auto Sleep settings, navigate to the TIME MENU. Use the ▼▲ buttons to move through the options, press the OK button to confirm your selection, and use the ◀▶ buttons to adjust the settings.

You can adjust the audio track, subtitle, or program in the Info menu while playing the video file. To access the Info menu, choose the Info icon and press the OK button.