Haier LE32K5000 Service Manual

YesAV No sound but have pictureChange MainboardStill having problemsCheck if there is sound input signalCheck the P8 JACKYesNoCheck if there is signal at L201 and L202Check if there is signal at C222andC223NoYesCheck HEADPHONE have soundCheck the speakersYesCheck P1402 JACKReplace U201No- 56 -

/ 68

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

To connect external equipment to the Haier LE32K5000 TV, refer to the 'External Equipment Connections' section in Chapter 5 of the service manual. This section provides detailed instructions on how to properly connect various external devices.

The resolution of the Haier LE32K5000 TV is 1366x768 pixels.

The TV supports aerial connections with an IEC (female) type and has an input impedance of 75 ohms unbalanced.

The HDMI2(ARC) port on the Haier LE32K5000 is used for connecting audio/video devices with HDMI interfaces. The ARC (Audio Return Channel) feature allows the TV to send audio data back to the receiver through the same HDMI cable, simplifying the setup.

The Haier LE32K5000 is compatible with HDMI cables, HDMI to DVI cables, and Analog Audio cables (Stereo to RCA type).

No, the HDMI cable, HDMI to DVI cable, and Analog Audio cable are not supplied with the product.

To change the channel, use the CH+ or CH- buttons on the front panel or the remote control. In TV mode, press CH+ to go up a channel or CH- to go down a channel.

To access a specific teletext page, press the 'TEXT' button to enter teletext mode. Then, use the number keys (0 to 9) to enter the page number you want to view. For example, to view page 120, enter 120. The page number will be displayed at the top left of the screen, and the page will be shown once the counter stops.

The 5V_USB port has a power rating of 1A.

The 12V_Normal port has a power rating of 1.85A.

Related manuals for Haier LE32K5000