 Service ManualModel No.:- 11 -3-4-1.Connector de finitionPin No. Symbol Function Remark1 VCC +12V Power Supply2 VCC +12V Power Supply3 VCC +12V Power Supply4 VCC +12V Power Supply5 GND Ground6 GND Ground7 GND Ground8 GND Ground9 SELLVDS Select LVDS data order [Note 1]Default: Pull down(L:GND)[Note 2]10 Reserved Not Available11 GND Ground12 RIN0- Negative (-) LVDS differential data input LVDS13 RIN0+ Positive (+) LVDS differential data input LVDS14 GND Ground15 RIN1- Negative (-) LVDS differential data input LVDS16 RIN1+ Positive (+) LVDS differential data input LVDS17 GND Ground18 RIN2- Negative (-) LVDS differential data input LVDS19 RIN2+ Positive (+) LVDS differential data input LVDS20 GND Ground21 CLKIN- Clock Signal(-) LVDS22 CLKIN+ Clock Signal(+) LVDS23 GND Ground24 RIN3- Negative (-) LVDS differential data input LVDS25 RIN3+ Positive (+) LVDS differential data input LVDS26 GND Ground27 Reserved No Connection28 Reserved No Connection29 GND Ground30 Reserved No Connection[Note] GND of a liquid crystal panel drive part has connected with a module chassis. |
Questions and answers
Need help?
Ask question about this manual
Frequently asked questions
The resolution of the Haier LE32F32200 TV is 1366x768 pixels.
The total power input for the Haier LE32F32200 TV is 50W.
To improve picture quality from an antenna in a poor signal area, consider installing a signal amplifier. If you need to split the antenna signal to connect two TVs, use a two-way splitter.
If the TV does not turn on, simply unplug the unit from the AC outlet and plug it back in. The unit should return to normal operation.
No, you should use the attached power cord only. Do not use any other power cord with the TV.
To adjust the picture settings, go to the 'Picture' menu. Use the arrow keys to select the option you want to adjust (e.g., contrast, brightness, color) and press OK to make changes. Note that if you adjust contrast, brightness, color, and sharpness, the picture mode will be set to user.
The Haier LE32F32200 TV offers three color temperature settings: Cool, Normal, and Warm. Cool gives the white colors a blue tint, Normal gives the white colors a neutral tint, and Warm gives the white colors a red tint. You can adjust the color temperature in the 'Picture' menu under 'Color Temperature'.
If your TV has no sound but the picture is fine, you should first check the speakers. If the speakers are working properly, check the signal input circuit of C710 and C745. If there is no signal at these points, you may need to check the input source or consider replacing components like LD5, LD7, LD8, LD9, UD3, LD3, or U702.
To troubleshoot the mainboard, first check if there is output at Pin1 and Pin4 of J17. If there is output, check if there is input at Pin3 and Pin12 of UD3. If there is no input, you may need to change the mainboard. Additionally, check if there is +12V at Pin15 and Pin28 of U705, and +5V at Pin8 of U702. If these voltages are not present, further investigation and component replacement may be required.
A vertical bar (V B/D) on the screen of your Haier LE32F32200 TV can be caused by a block defect in the TCP, which may include issues such as TCP cracking or cracking, TCP lead cracking, or ACF bonding short.
Related manuals for Haier LE32F32200
