Haier LE32D2000 User Manual

For installation instructions, please refer to the 'Installation' section on page 5 of the user manual.

The basic operations for the Haier LE32D2000 TV are detailed in the 'TV Operation' section on page 11 of the user manual.

The resolution of the Haier LE32D2000 TV is 1366 x 768 pixels.

The Haier LE32D2000 TV has 2 AV inputs.

To attach the stand base to the TV, firmly tighten the supplied 4pcs 4x18mm screws to the bottom of the TV.

To wall mount the TV, use the two rollers to fix the TV onto a wall via the two holes on the back of the television. The distance between the two holes is 160mm.

In the SOUND MENU, you can adjust sound effects such as treble, bass, and balance. Additionally, you can control the Power audio (PA) to increase or decrease the speaker output of external speakers, and change the EQ settings for different audio modes like Standard, Movie, and Music. These settings can be adjusted in the User's sound mode.

To delete a channel, press the RED button on the remote control while the channel is selected.

If your USB device is not supported, ensure that it provides more than 500mA or 5V of power. Exceeding the maximum supported current may result in damage or data loss. Make sure the USB device is properly plugged into the slot and try selecting the appropriate item (photo, music, movie, or text) from the USB menu.

To enter the hotel mode menu, press the 'menu' button, then go to 'lock' and press on 'hotel mode'. To exit, follow the same steps and turn off the hotel mode. The default password is '0000'.