Haier LE22F33800 User Manual

To assemble the base stand, refer to the instructions provided on page 5 of the manual.

If your TV has been exposed to rain or moisture, you should unplug it immediately and refer it to qualified service personnel for servicing. Exposure to moisture can damage the TV and pose a safety risk.

Never stand on, lean on, or suddenly push the television or its stand. Do not place your television on an unstable cart, stand, shelf, or table. Pay special attention to children to prevent serious injury.

The resolution of the Haier LE22F33800 TV is 1920 x 1080 pixels.

If your TV does not turn on when you press the power button, ensure that the TV is properly connected to a power source. Additionally, check the indicator LED on the front panel. If it is red, the TV is in standby mode. Press the power button again to turn the set back to standby.

The Haier LE22F33800 TV supports an IEC (female) aerial connection with an input impedance of 75 unbalanced.

Yes, you can connect compatible mobile phones and tablets to the Haier LE22F33800 TV using the HDMI2 port, which is MHL enabled. You will need a USB to HDMI cable to make the connection. Please check the documentation of your device to ensure compatibility.

To turn on and off the TV, press the power button (1) on the remote control.

To adjust the picture settings, go to the Picture Menu. Use the arrow keys to select options such as contrast, brightness, sharpness, tint, color, and color temperature. Press OK to adjust the selected option.

The MPAA settings offer the following movie-rating control levels: N/A, G, PG, PG-13, R, NC-17, and X. Each of these ratings corresponds to different levels of content suitability for various age groups.