Haier LD65Q8000AU Service Manual

SERVICE MANUALLED TVModel No.ChassisMS6369This service information is designed for experienced repair technicians only and is not designed for use by the general public.It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repairthe product or products dealt with in this service information by anyone else could result in serious injury or death.Haier Group©2011 Qingdao Haier Electronics Co., Ltd.All rights reserved. Unauthorized copying and distribution is a violation of law.WARNINGLD65Q8000AU

/ 75

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

The amplifier power for the stereo is 2×6W (8Ω) and for the subwoofer is 1×12W (8Ω).

The standby power consumption is less than 0.2W (board only).

The maximum input voltage of the signal for the Haier LD65Q8000AU is 4 Volts.

If the power board is not functioning correctly, check the connections and ensure that all components are properly seated. If the issue persists, consult the troubleshooting section of the manual for specific steps to diagnose and resolve the problem.

The Output Connector in the Haier LD65Q8000AU is used for connecting various components and ensuring proper functionality of the device. It is mentioned multiple times in the manual, indicating its importance in the setup and operation of the product.

To troubleshoot issues related to the Output Connector, refer to the specific instructions and diagrams provided in the manual. Ensure that all connections are secure and that the components are properly aligned. If issues persist, consult the detailed troubleshooting section or contact customer support for further assistance.

To use the 'EHDG' function, follow the instructions provided in the manual. This function is likely related to specific settings or operations of the device.

If the display shows '6SHDNHU', it indicates a specific error or status. Refer to the troubleshooting section of the manual for guidance on resolving this issue.

Related manuals for Haier LD65Q8000AU