Haier LCD TV Manual

Characteristic Functions 1Important Safety Instructions 1Technical Specifications 3The Technical Specifications for Final Product 3Technical Specifications for TV 5VGA Display Mode 5Power Management 6Packing Listing 6Installation & Connection 6Antenna Connection 6Power Connection 7Computer Connection 7AV1/AV2 Video Signal Connection 7I C 7YPbPr/YCbCr Input Connection 7AV Output Connection 7Position of Control Keys 8Remote Control 8Basic Operation Instruction 9Power On 9Standby 9Signal Source Selection 9Menu Operation Instruction 10PICTURE 10SOUND 11OSD 11TV 12USB Signal Source Operation 13Simple Troubleshooting 16HDMI Digital Port Connection 7S-VIDEO nput onnectionTable of Contents

/ 17

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

To connect your computer to the Haier LCD TV, you can use the VGA port. Refer to the 'Computer Connection' section on page 7 of the manual for detailed instructions.

If the TV is not displaying any picture, refer to the 'Simple Troubleshooting' section on page 16 of the manual for potential solutions.

The input ports include VGA, YPbPr, HDMI, S-Video, CVBS, USB and TV. You can connect various devices using these ports.

Before cleaning the TV, make sure to unplug the power cord. Use a wet soft cloth to clean the machine. Avoid using liquid cleansers, aerosol cleansers, alcohol, impregnant, or ammoniac liquid, especially on the screen, as these can cause damage.

When moving the TV, be careful to avoid striking it, especially the screen. If using a handcart, be cautious of hard braking, overexerting, and uneven ground to prevent the product from overturning and causing injury.

To adjust the volume, use the 'VOL+' and 'VOL-' keys on the remote control. These keys will increase or decrease the sound volume, respectively. You can also use the 'VOL+' and 'VOL-' keys on the TV itself.

To install the batteries in the remote control, take off the cover of the battery box and fix two AAA batteries with 1.5 volts, ensuring they conform to the polarity of the remote control battery box.

To adjust the picture settings, press the 'MENU' key on the remote control or on the control panel. Use the 'Left/Right' keys to select the 'PICTURE' menu. Then, use the 'Down' key to enter the 'PICTURE' menu. Use the 'Up/Down' keys to select the setting you want to adjust, such as 'Contrast', 'Brightness', 'Saturation', 'Hue', 'Sharpness', 'Aspect Ratio', 'Color Temp.', or 'Noise Reduction'. Use the 'Left/Right' keys to adjust the value or setting. Press the 'MENU' key to exit the menu when done.

If certain menu options are grayed out and cannot be adjusted, it means that those selections are not available in the current mode. The TV automatically hides and changes the color of selections that cannot be adjusted in the current mode. Ensure you are in the correct mode or try changing the mode to access the desired settings.

To adjust the aspect ratio, go to the 'Option' menu and select 'Aspect Ratio'. You can choose from four modes: 'Full', '4:3', 'Subtitle', or 'Film'.

Related manuals