Haier L42S9 Owner's Manual

The 'bolt of lightning' symbol indicates that there is uninsulated material within your unit which may cause an electrical shock. It is a warning not to remove the product covering for safety reasons.

No, you should not place objects filled with liquids on your TV. This is to reduce the risk of fire or electric shock.

Ensure that the installation is carried out by qualified servicemen. Improper or incorrect installation may render the set unsafe.

When mounting the Haier L42S9 TV on the wall, ensure that you comply with the VESA standard for wall mounting. It is recommended to have qualified personnel perform the installation to avoid accidents or injuries. Make sure the wall mount is securely fixed to meet safety standards.

The Haier L42S9 has several video input options including AV IN, VIDEO, S-VIDEO, PC IN (VGA), HDMI 1, HDMI 2, HDMI 3, and COMPONENT (YPbPr).

To connect your DVD player or recorder to the TV using component video inputs, locate the YPbPr Input on the rear of the TV and the corresponding Component Video Output (R, G, B) on the rear of your DVD player/recorder. Connect the cables accordingly.

To mute the sound, press the Mute button. The word 'Mute' will appear on the screen when the sound is muted. To restore the sound, press the Mute button again.

To perform an automatic channel scan, press the MENU button on the remote control. Use the cursor down to select Install in the Settings menu. Use the cursor right to enter the Install menu. Press cursor down to select Auto store in the Install menu. Use the cursor right to enter the Auto store menu and press OK to start channel scanning. The process may take up to 3 minutes to complete.

To reset your Haier L42S9 TV to its factory settings, follow these steps: 1. Select 'Factory reset' in the Install menu. 2. Press the cursor right to enter Factory reset. 3. Select 'Yes' and press the cursor right for resetting the TV.

To block specific TV channels, select 'Lock program' in the Auto lock menu and press the cursor right to enter it. Use the number buttons to enter the channel you want to block, then press the cursor up/down to confirm blocking that channel.