Haier L24T6 Owner's Manual

To access the TV Menu, refer to the 'TV Menu Operation instructions' section on page 10 of the manual.

No, you should only use dry cloths to clean the device.

Do not push the TV set in front of the casing or from the top of the casing, as this may cause the TV set to overturn. Additionally, avoid placing electronic devices or toys on the casing to prevent them from falling and causing damage or injury.

Keep the outdoor antenna far away from the power cord to avoid any potential hazards. If the outdoor antenna is connected to the receiver, ensure the antenna system is grounded to protect it from surge and electrostatic accumulation. Follow the state power regulations for proper grounding.

To assemble the TV set and the base, first place the front of the TV set down on a soft cloth or pad on a table. Then, put the base on a stable surface and insert the base into the slot at the bottom of the TV set.

Press the POWER button to turn the LCD TV on or off.

Press the VOL+ or VOL- buttons to adjust the volume up or down.

To access the menu, press the menu key. Use the Up or Down keys to select the function option you want to adjust. Press the Right key or OK button to enter the submenu or start/ adjust the selected function. To exit the menu, press the EXIT button, and to exit the submenu, press the MENU button. To exit the main menu option, press the Left key.

The available signal sources on the Haier L24T6 TV include TV, AV-1, AV-2, YPbPr, HDMI, and VGA. To select a signal source, press the 'Signal Source' button and choose the desired input from the list.

The YPbPr input on the Haier L24T6 TV allows you to connect directly to high-resolution video sources, such as the color difference input of a DVD player or a digital television. This provides better image resolution and definition.