Haier L22T6 Operation Instructions Manual

Also see for L22T6:

Contents

Haier L22T6 Operation Instructions Manual Manual pdf 15 page image

14GlossaryAudio/video inputUsed for audio and video signal input. It is specially designed to be used withDVD or set top box (or other accessories) to connect related signal sources.YPbPr inputAllow TV to connect directly to high resolution video sources, such as colordifference input of DVD player and digital television. Provide better imageresolution and definition.MenuFunction control list displayed on the TV screen is used for adjustment.RFAs RF or modulation signal designed for carrier used in TV and radioSleep timerThe TV can be set to be turned off after a fixed amount of time through thisfeature

/ 19

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

The descriptions of the remote control functions are provided on page 9 of the manual. Please refer to that section for detailed instructions on how to use the remote control.

No, you should only use dry cloths to clean the device.

To prevent the TV set from overturning, do not push it from the front or the top of the casing. Additionally, avoid placing electronic devices or toys on the casing to prevent them from falling and causing damage or injury.

If the TV set's indicator is red, it means the TV is in standby mode. To turn on the TV, press the power button at the side of the TV set.

You can connect an external audio source to the Haier L22T6 using the AUDIO input interface, which includes L and R channels for stereo sound.

Press the POWER button to turn the LCD TV on or off.

Press the VOL+ or VOL- buttons to adjust the volume up or down.

To access the menu, press the MENU key. Use the Up or Down keys to select the function option you want to adjust. Press the Right key or OK button to enter the submenu or start/ adjust the selected function. To exit the menu, press the EXIT button. To exit the main menu option, press the Left key.

AFC (Automatic Frequency Control) helps the television detect television signals automatically and adjust the channel to the correct position in case of signal deviation within a certain frequency range. To enable or disable AFC, go to the TV Menu, select 'AFC', and set it to 'On' or 'Off'.

Ghost phenomena may be caused by things blocking the antenna, such as high buildings or hills. Use an adjustable high antenna, which may improve image quality. Additionally, ensure that the power cord of the TV set is plugged into the outlet. If the issue persists, unplug the TV set, wait for 60 seconds, and then plug it back in and turn it on again.

Related manuals for Haier L22T6