Questions and answers
Need help?
Ask question about this manual
Frequently asked questions
To clean the Haier HLH26BBTV, first unplug it from the wall outlet. Do not use liquid or aerosol cleaners. Use only a dry cloth for cleaning.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Ensure the grounding pin on the AC cord power plug is securely connected to prevent electric shock.
If liquid has been spilled into the unit, you should immediately unplug the unit and contact a qualified technician for service.
If the unit does not operate normally, ensure you are following the operating instructions. If the issue persists, it may indicate a need for service. Contact a qualified technician to restore the unit to its normal operation.
To turn on or off the Haier HLH26BBTV, use the Power On/Off Button on the remote control or the device itself.
To adjust the volume, use the VOL- and VOL+ buttons on the remote control or the device itself.
To change the input source on your TV, press the INPUT button on the remote control. The Source menu will appear on the screen. Use the CH+/- button to select the desired input source and then press the VOL+/- button to confirm your selection.
To change the sound mode, press the S.STD button on the remote controller to display the menu. Use the CH+/- buttons to select the desired mode (Personal, Standard, Music, or Theater), and then press the VOL+/- buttons to confirm your selection. You can also change the sound mode from the sound menu function screen.
To manually select the correct color system, press the MENU button and then use the VOL+/- buttons to navigate to the picture menu. Use the CH+/- buttons to select 'Color Sys.' and then use the VOL+/- buttons to choose the correct color system. In general, you can set it as 'AUTO'.
To enable or disable the Surround Sound feature, press the MENU button and use the VOL+/- button to select the SOU.menu. Then, use the CH+/- button to select Surround. Press the VOL+/- button to set Surround as Off or On.