No, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure. This is to prevent electric shock.

The model and serial number are located on a label at the back of the unit.

Staple your receipt to this manual. You will need it to obtain warranty service.

To access the on-screen menu, press the MENU button on the side panel of the TV.

To change the input source, press the INPUT button on the side panel of the TV. Press it repeatedly to cycle through the available sources until you reach the one you want to watch.

To turn on and off the TV, press the POWER button on the remote control.

To adjust the volume, press the VOLUME UP or VOLUME DOWN buttons on the remote control.

To connect your computer to the TV using VGA, connect the VGA cable from your computer to the VGA IN port on the TV. Then, make the corresponding audio connection if using a sound card. Adjust the VGA sound as required. Turn on both the computer and the TV, and use the INPUT button on the remote control to select the VGA source. If there is noise in the image, try changing the VGA mode to another resolution, change the refresh rate, or adjust the brightness and contrast on the menu until the picture is clear.

The TV supports digital pictures in .JPG, .JPEG, .BMP (Baseline & Progressive), and .PNG formats; digital music in .MP3 (8~320kbps) format; and videos in .avi, .mpg, .mpeg, .vro, .vob, and .ts formats coded with MPEG-1 or MPEG-2 standard.

Related manuals for Haier HL42XZK42