Haier HL32D1a Owner's Manual

No, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure. This is to prevent electric shock.

The model and serial number are located on a label at the back of the unit.

You should record the model number, serial number, and date of purchase. It is also recommended to staple your receipt to the manual for warranty service.

Yes, you can still use your Haier HL32D1a to watch analog TV for other purposes such as watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing video games. However, for over-the-air digital programming, you might need a TV Converter if your antenna is not suitable.

The LED color on the front panel indicates the power state of the TV. If the LED color is Blue, it means the TV set is powered on. If the LED color is Red, it means the TV set is in standby state.

To connect a DVD player to the TV using HDMI, locate the HDMI port on the back of the TV, which is indicated by a white color band. Connect the HDMI cable from the DVD player to this port.

To connect a computer to the TV, use the PC IN port on the back of the TV. Connect the video and audio cables from your computer to this port.

To turn on the TV, press the 'Power' button on the remote control. Note that the TV is never completely powered off unless physically unplugged. After pressing the power button, wait for the LED to change to blue and stop flashing before the TV turns on.

To lock the control buttons on the side panel of your Haier HL32D1a TV, you can use the [Button Lock] feature. Select On to lock the buttons, which will then only allow control via the remote control. To unlock, select Off.

To clean the screen, first unplug the power cord. Then, dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If additional cleaning is needed, use a clean, damp cloth. Avoid using liquid cleaners or aerosol cleaners.