OneStart

Haier HL24XK2 Owner's Manual

Also see for HL24XK2:

Contents
  1. Warning2
  2. Safety Instructions3
  3. Introduction5
  4. Remote Control7
  5. Installation8
  6. Operation11
  7. Maintenance22
  8. Specification22
  9. Troubleshooting22
  10. Warranty23
Next
/ 23
Questions and answers
Need help?
Ask question about this manual
Frequently asked questions

To adjust the volume, use the VOL +/- buttons on the side panel of the TV. These buttons can also serve as left/right buttons when navigating the on-screen menu.

You can connect a USB flash drive to the USB input on the back panel of the TV. This will allow you to view MPEG2 videos, JPEG images, or listen to MP3 songs.

The HDMI IN port is used to connect a HDMI device to the TV. This allows you to receive digital audio and uncompressed digital video from the connected device.

To improve picture quality in a poor signal area, consider purchasing a signal amplifier and installing it properly. Additionally, ensure that the antenna is correctly positioned and consider using a 2-Way Signal Splitter if the antenna needs to be shared with another TV. For professional assistance, contact a local expert to install the antenna properly.

To connect your Haier HL24XK2 TV to a cable box, follow these steps: 1. Connect the audio and video cables from the cable box's output jacks to the TV input jacks, matching the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2. Select the input source by using the INPUT button on the remote control or on the TV.

If the TV screen displays 'No Signal,' it means there is no input signal being received. Ensure that the cables are properly connected and that the correct input source is selected using the INPUT button on the remote control or on the TV. Also, verify that the external equipment (e.g., cable box, DVD player) is turned on and functioning correctly.

To adjust the sharpness, go to the Video menu, select 'Sharpness,' and use the VOL+/- button to increase or decrease the level. Increasing the level will make the image cleaner and clearer, while decreasing it will make the picture smoother.

To start a channel scan, press the VOL+/ENTER button. To cancel the scan, press the EXIT button.

To lock a specific type of rated program, press the CH+/- button to select the item you want to lock. Then press the ENTER button to confirm the lock. Press the ENTER button again to resume it.

The MPAA ratings on your Haier HL24XK2 TV are as follows: G (General Audience), PG (Parental Guidance Suggested), PG-13 (Parents Strongly Cautioned), R (Restricted), NC-17 (No One 17 and Under Admitted), and X (Adults Only).
Related manuals for Haier HL24XK2
Haier HL22K2 Owner's Manual first page preview
Haier HL22K2 Owner's Manual
Haier HL32XK2 Owner's Manual first page preview
Haier HL32XK2 Owner's Manual
Haier HL26K Owner's Manual first page preview
Haier HL26K Owner's Manual
Haier HL26R Owner's Manual first page preview
Haier HL26R Owner's Manual
Haier HL26K1 Owner's Manual first page preview
Haier HL26K1 Owner's Manual
Haier HL26K1 Owner's Manual first page preview
Haier HL26K1 Owner's Manual
Haier HL26K1 Owner's Manual first page preview
Haier HL26K1 Owner's Manual
Haier HLA42K2 Owner's Manual first page preview
Haier HLA42K2 Owner's Manual
Haier HL26R-A Owner's Manual first page preview
Haier HL26R-A Owner's Manual
Haier HL26ATB Owner's Manual first page preview
Haier HL26ATB Owner's Manual