Haier HL19SL2 Owner's Manual

No, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure. This is to prevent electric shock.

The Haier HL19SL2 is Energy Star 4.0 compliant, which means it is designed to use less energy, helping the environment and saving you money on energy bills.

To switch on/off the Haier HL19SL2 TV set, refer to the instructions provided in the 'Switching On/Off the TV set' section on page 10 of the manual.

The Haier HL19SL2 TV offers various connection options including HDMI input, antenna connection, VCR connection, external A/V source setup, component setup, and computer connection. Detailed instructions for each of these options can be found in the 'Connection Options' section starting from page 5 and the 'External Equipment Connections' section on page 7 of the manual.

Strong light may interfere with the signals. Try changing your position to operate the remote controller. Ensure there are no obstacles between the remote controller and the television set. Also, make sure the remote control is aimed at the remote sensor on the TV.

After subscribing to a cable TV service from a local provider, you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. For further information regarding cable TV service, contact your local cable TV service provider(s).

To turn off the TV and put it in standby mode, press the POWER button on the remote control or on the TV.

If the TV screen displays 'No Signal', it means there is no input signal being received. Ensure that the input source is correctly selected using the INPUT button on the remote control or on the TV, and that the external equipment is properly connected and turned on.

To turn on the Closed Caption feature, press the VOL+/ ENTER button to enter the submenu. Then, select the Closed Caption option and choose the desired mode (CC1, CC2, CC3, or CC4).

To set the sleep timer, press the VOL+/- button to select the number of minutes you want the TV to stay on before turning off. You can choose from options like 5Min, 10Min, 15Min, 30Min, 45Min, 60Min, 90Min, 120Min, 180Min, or 240Min. To turn off the sleep timer, select Off.