Haier HL19LE2a Owner's Manual

When replacing the batteries, ensure you use the same or equivalent type to avoid the danger of explosion. Additionally, do not expose the batteries to excessive heat, such as direct sunlight or fire.

If the TV causes harmful interference to radio or television reception, you can try the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help.

If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet. Do not attempt to modify the plug yourself as it may defeat the safety purpose of the polarized or grounding-type plug.

Yes, but it must be used with a UL Listed Wall Mount Bracket with a minimum weight/load capacity. Please refer to page 27 for more details.

To prepare your Haier HL19LE2a LCD HDTV for wall mounting, follow the instructions provided in the 'PREPARING YOUR LCD HDTV FOR WALL MOUNTING' section of the manual. This section will guide you through the necessary steps to ensure safe and proper installation.

To turn on or off the Haier HL19LE2a TV, press the POWER button (button 6).

To turn off the TV completely, you need to physically unplug it. Pressing the power button on the remote control will put the TV in standby mode, but it will not be completely powered off.

When the menu is not displayed, you can adjust the volume by pressing the VOL+ or VOL- buttons on the remote control.

To access and edit the favorite channel list, press the Menu button to display the main menu. Navigate to the Channel menu and select 'FAV Channel Setting'. From there, you can add or delete favorite channels as needed.

The recommended resolution for the HL22XLE2 and HL24XLE2 models is 1920x1080@60Hz.