Haier HBR-1301AA User Manual

o Use a spanner to adjust the height of the adjustable feet.o If your aperture has a height of 820 mm, then the adjustablefeet should be set at a height of 30 mm.o If your aperture has a height of 870 mm, then the adjustablefeet should be set at a height of 50 mm.o The appliance should be flush with the underside of the worktopand be level. IMPORTANT: If the appliance is not level, then thedoor and door seal may be affected.o Insert the plinth/kickboard and then refit the grid in its originalposition to hold it in place.o IMPORTANT: Please note that as shown in the abovedrawing, an appropriately sized ventilation cut MUST bemade in the furniture plinth/kickboard.Fitting the furniture door to the applianceIf you need the appliance door to open from the otherside, then please reverse the door before commencing theinstallation process. (See “Reversing the door section”).Tools required:-o Tape measureo Sharp pencilo Small flat bladed screwdrivero SpannerIMPORTANT: We recommend that two people install this appliance.21

/ 26

Questions and answers

Need help?

Ask question about this manual

Related manuals for Haier HBR-1301AA