Haier HBR-1301AA User Manual

o Reattach the appliance door and then fully re-tighten theretaining screws (1) and the door retaining screws (2).o Insert the cover caps (3) into the holes that are now exposed onthe right hand side of the cabinet.IMPORTANT: Check that the door opens and shuts correctly,without fouling, after you have completed the door reversalprocess.After the door has been reversed, you should checkthe door seal of the appliance. The seal should notbe creased or crushed; otherwise there will be a gapbetween it and the inside of the door.o The seal must adhere properly all the way around the door.o If the seal is not adhering to the cabinet properly, then youshould either:-1. Use a warm damp cloth and manipulate the seal until it doesadhere to the cabinet properly, all the way around the door.or2. Use a hair dryer on its lowest heat setting and lightly heat theareas of the door seal that are not adhering correctly. Theheat will make the seal more pliable and this will allow you tomanipulate the seal into the correct position.IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUTTHE LOWEST HEAT SETTING, OR HEAT THE SEAL FOR A LONGPERIOD OF TIME. OTHERWISE DAMAGE MAY BE CAUSED TOTHE DOOR SEAL, WHICH WOULD NOT BE RECTIFIED UNDERTHE GUARANTEE FREE OF CHARGE.19

/ 26

Questions and answers

Need help?

Ask question about this manual

Related manuals for Haier HBR-1301AA