Haier HBC-200 Service Manual

Also see for HBC-200:

Refrigerator Model:HBC-70/200（India）８INSTALLATION AND ACCESSORY PARTSInstallation and Accessory PartsUnpacking Your Ice-lined refrigerator1.Remove all packaging material; this includes the foam base and all adhesivetape holding the refrigerator accessories inside and outside.2.Inspect and remove any remains of packing, tape or printed materials beforepowering on the refrigeratorAdjusting Your Refrigerator1.Your refrigerator is designed for freestanding installation only. It should not berecessed or built-in.2.Place the refrigerator on a floor strong enough to support it fully loaded.3.When moving the refrigerator, never tilt it more than a 45-degree angle. Thiscould damage the compressor and the sealed system.4.If the refrigerator is tilted let it stand in an upright position for at least 24 hoursprior to plugging. This is to allow the refrigerant to settle.·Proper Air Circulationl To assure your refrigerator works at the maximum efficiency it was designedfor, you should install it in a location where there is proper air circulation,l Plumbing and electrical connections.l The following are recommended clearances around the refrigerator:Sides…………..2”(50mm) Top. ……………2”(50mm)Back…………..2”(50mm)PDF created with pdfFactory trial version www.pdffactory.com

/ 67

Questions and answers

Need help?

Ask question about this manual

Related manuals for Haier HBC-200