Getting startedLED Backlit Flat TV Instruction Manual EN-22EnChild lock❖Press the 34 button to select Off/On.Tuning lock❖Press the 34 button to select Off/On. (Whenswitched on, some operations such as search willbe not available.) When you enter the tuning menu,tuner lock will be on the screen. If you want to use thetuning menu, you need to enter the lock menu to setthe tuner lock to off or select Clear lock.Source set❖Source set is used for setting up preset channels.Press the OK button to enter the sub-menu. Press the5 button to select off, TV, SCART, component, PC,HDMI1, HDMI2, HDMI3 and HDMI4 in turn.C❖ hannel no.Channel no. controls the channel number when youturn on the TV.Source lock❖Source lock will control the source when you turn onthe TV.Press the OK button to enter the sub-menu. Press the5 button to set the source lock.If you press the SOURCE button when the source lockswitched to on, the TV can switch to a correspondingsource and will display that the Source is locked.Max. volume❖Press the 34button to adjust from 0 –100. If a certainvalue is set, when the volume is adjusted, the soundvalue cannot exceed the maximum volume value. Ifthe current volume is higher the maximum volume,when the lock set menu is set, the current volumewill become the set maximum volume. If the currentvolume is below the maximum volume, the volumeset by the user will remain unchanged.Initial volume mode❖Press the 34 button to select Off/On. The TV willstore this information, and the next time the TV isswitched on, it will be at this volume.Initial volume❖The TV will store the setting, andwill be the volumewhen the TV is next turned on.Parental lock❖Press the OK button to enter the sub-menu. Press the5 button to select OFF or 3 – 18 to limit the age ofchildren who will watch TV.Channel lock❖Press the 5 button to select the channel you wantto lock.Clear lock❖Press the 5 button to select clear lock mode.Press the OK button to unlock all set modes This willset all lock options to off and the maximum volumewill return to 100.Shortcut menudisplaySubtitle function❖Pressing the SUBTITLE button on the remote controlwill set the subtitle function to On or Off.NotePressing the SUBTITLE button on the remote will❏only display the subtitle languages menu in DTVmode.CH.LIST function❖Pressing theA CH.LIST button on the remotecontrol will display the channel list menu.Press the red/green button to select from satellite,B digital or analogue in tuner mode.Press the yellow button to select from satellite orCdigital in the select list. You can press the 5button to select video/radio/data/all.Press theD 34 button to page up or page down.Press the blue button to select the satellite list.EGUIDE function❖Press the GUIDE button on the remote controlto display the programme guide menu. Press the534 button to select the programme.You can press the EXIT button to cancel the changesat any time.