19Reversing the appliance doorWe recommend you seek the help of another individual to support the doors whilst performing thisoperation. Always wear adequate PPE (Personal Protective Equipment) for the task at hand.Prepare a surface with a soft, clean towel or similar where you can place the door during thesesteps.Ensuring the door seals correctly:It is normal for the seal to be compressed after the door has been reversed. With the door closed,use a hair dryer to expand the seal and fill the gap between the door and the body of the appliance.Take care not to use the hair dryer too close to the appliance, which could damage the seal. Adistance of approximately 10cm should be adequate.When completed, allow the seal and door to cool before touching them. Once done, the sealshould remain in position.