Haier BI SD 177 User Manual

Language

English

Contents

Deutsch3

English23

Español41

Français61

Italiano81

Dutch101

Polski121

Português141

Haier BI SD 177 User Manual Manual pdf 34 page image

13A. Freezer temperature adjustment sensorThis button is used to adjust the temperature within the freezer. Press this sensor once to activateadjustment, and then as many times as necessary until the desired level is selected. The settingsrange from 1 to 6 with 1 being the warmest and super freeze being the coldest.Please note: Where possible, avoid having the temperature setting on 5 or super freeze (snowflake)all of the time. This will help to alleviate strain on the compressor and system.B. Freezer temperature setting displayThis display will illuminate the current temperature setting. Adjusting the temperature will cyclethrough this display.Please note: You do not use numbers 1 to5 or the snowflake to change thetemperature. Instead, use the freezertemperature adjustment sensor (A).C. Power buttonPress the sensor once to rose up thefunction, and then press for 3 seconds to switch the appliance on or off .This product has power-off or power failure memory function.Care and cleaningAlways disconnect the appliance from the power supply before any cleaning or maintenance.The drawer sections should be cleaned using a solution of bicarbonate of soda and lukewarm water.Do not use abrasive products or detergents. After washing, rinse and dry thoroughly.Clean the compartments separately by hand with a mild solution of washing up liquid and water.Do not use abrasive cleaners or detergents.If the appliance is not to be used for prolonged periods of time, unplug and clean the appliance.The doors should be left slightly ajar to prevent the formation of mildew and unpleasant odors.Defrosting the freezerThe freezer has a no frost system which is designed to prevent the heavy build up of ice. Undernormal use, there should be no need to regularly defrost the freezer system.Please note: If you are regularly finding a heavy build up of ice, or pools of water, in the freezersection then it is likely that the door is not sealing properly. This could be due to a defective door

/ 159

Questions and answers

Need help?

Ask question about this manual

Related manuals for Haier BI SD 177