Haier 65UF2505 User Manual

Also see for 65UF2505: User manual

4t WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates intoyour TV, unplug the power cord and contact your dealer. Continuous use in this case may result in or electricshock.t Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cordand contact your dealer immediately. Do not try to repair your TV yourself.t Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internalcomponents may function abnormally. Unplug the power cord immediately and contact your dealer for repair.t Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments witht Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged beforemoving your TV.t When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damageof time, unplug the power cord.t To reduce risk of electric shock, do not touch the connector with wet hands.t Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which candamage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine,t If any of the following occurs, contact the dealer:- The power cord fails or frays.- Liquid sprays or any object drops into your TV.- Your TV is exposed to rain or other moisture.- Your TV is dropped or damaged in any way.- The performance of your TV changes substantially.tshall be placed on the apparatus.t The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readilyoperable.telectric shock, do not perform any servicing other than that contained in the operating instructions unless yout Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the antenna system isgrounded so as to provide some protection against voltage surges and built up static charges. Section 810 of theNational Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of themats and supporting structure grounding of the lead-in wire to an antenna discharge unit, size of groundingconnectors, location of antenna discharge unit, connection to grounding electrodes and requirements for thegrounding electrode. See Figure below.EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODENote to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Articleground shall be connected to the 6 English grounding system of the building, as close to the point of cable entryas practical. Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to theadapter!ANTENNAANTENNA DISCHARGE UNITGROUNDING CONDUCTORSPOWER SERVICE GROUNDING ELECTRODE SYSTEMGROUND CLAMPSELECTRIC SERVICE EQUIPMENTGROUND CLAMP

/ 21

Related manuals for Haier 65UF2505