Haier 32D3005 User Manual

When replacing the batteries in your Haier 32D3005 TV, ensure that you use the same or equivalent type of battery. Do not expose the batteries to excessive heat, such as direct sunlight or fire, as this could pose a risk of explosion.

If the TV starts to overheat, unplug it immediately. Ensure that all vents and openings are not covered or blocked, as inadequate ventilation can cause overheating. Also, avoid placing the TV in confined spaces or in a box while using it.

If the TV malfunctions and there is no video or audio, unplug it immediately. Do not attempt to open the TV cabinet or clean the internal parts yourself. Call service personnel to inspect and clean the internal part of the TV.

No, you should not install your TV near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. This can cause damage to the TV.

The model and serial number are located on the label on the back of the unit.

To turn on the Haier 32D3005 TV, follow the instructions provided in the 'TURNING ON THE TV' section on page 7 of the user manual.

Connect headphones to the HEADPHONE jack. When headphones are inserted, the TV speakers will be muted automatically.

Press the INPUT button to select the input source. Then, press the VOL+ button to change to the selected input source.

To connect your PC to the Haier 32D3005 TV, use the PC and PC AUDIO (L/R) jacks. Ensure that the cables are properly connected to the corresponding ports on both the TV and the PC.

Connections to the Haier 32D3005 TV must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.