Haier 29T7A Operation Instructions Manual
Questions and answers
Need help?
Ask question about this manual
Frequently asked questions
To clean the TV set safely, first pull out the power plug from the AC outlet. Use a dry, soft cotton cloth to clean the cabinet and screen. Avoid using benzene, petrol, or other chemicals, as they can damage the TV set.
If the TV set is not going to be used for a long time or during a severe thunder and lightning storm, it is recommended that you disconnect the TV set from the AC power outlet and remove the aerial plug to ensure safety.
To connect an antenna to the Haier 29T7A TV, you can use either a coaxial cable (75Ω) or a twin-lead cable (300Ω). For a coaxial cable, insert the antenna plug into the 75Ω socket. For a twin-lead cable, shape the cable as shown in figure D, connect the leads to an antenna adapter, and then insert the adapter into the 75Ω socket.
To replace the batteries in the remote control unit, place the unit face down and open the battery cover. Insert two 'AA' size batteries, ensuring the + and - signs on each battery match the + and - signs in the battery compartment. Close the cover of the battery compartment. Always replace both batteries at the same time and avoid using rechargeable batteries or mixing battery types.
To mute the TV, press the 'MUTE' button on the remote controller.
To set the sleep timer, press the CH+/- buttons to select SLEEP TIMER, then press the VOL+/- buttons to set the duration between 10 to 180 minutes. The TV will turn off automatically after the set time.
You can switch between the different sound modes by pressing the 'S.STD' button on the remote controller. The TV has four preset sound modes: Speech, Theatre, Music, and User. Each press of the button will cycle through these modes.
The Haier 29T7A TV offers three picture size options: Normal, 16:9, and Enlarge. You can change the picture size by pressing the ZOOM button on the remote controller. Each press will cycle through the different size options.
The Haier 29T7A TV offers several audio and video output options. For video, you have options like VIDEO, S-VIDEO, and component outputs. For audio, you have options like AUDIO-L, AUDIO-R, and AUDIO outputs. These can be connected to various devices such as DVD players, VCRs, and other external components.
If your TV has no sound or no picture, ensure that the power supply is connected to the TV set and turned on. Also, check that the TV set is not in 'Listen Mode' and that the brightness and contrast are not turned down. If the issue persists, consult with your local authorized service center.
Related manuals for Haier 29T7A

Haier 29T9B Operation Instructions Manual

Haier 29T9G Operating Instructions Manual

Haier 21T7A Operating Instructions Manual

Haier 29F9B Operating Instructions Manual

Haier 29FA1 Operating Instructions Manual

Haier 29F9G Operating Instructions Manual

Haier 29FV6 Operating Instructions Manual

Haier 29FV6 Operating Instructions Manual

Haier 29F99 Operating Instructions Manual

Haier L22T6 Operation Instructions Manual