Haier 29FV6 Operating Instructions Manual

To clean the TV set safely, always pull out the power plug from the AC outlet first. Avoid using benzene, petrol, and other chemicals to clean the cabinet and the screen.

If the TV set is not going to be used for a long time, or there is a severe thunder and lightning storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.

The 29FV6 model has the following audio and video inputs: S-Video input, AUDIO/VIDEO input, YUV-DVD component input, and Antenna input. Additionally, it has an AUDIO/VIDEO output.

To switch between TV and AV modes, use the TV/AV button on the remote controller. This button allows you to toggle between the TV input and the AV input, enabling you to view content from different sources.

To change the picture effect, repeatedly push the key associated with the picture effect. The effects will cycle through DYNAMIC, USER, STANDARD, and MILD. The USER setting is the last setting made by you.

To lock certain functions, push the [ ] key to bring up the lock menu. Use the [P+] [P-] keys to select each function and the [V+] [V-] keys to change the settings. You can lock general functions, program numbers, AV functions, and set volume limits. To change the password, select the CHANGE PASSWORD item and input your new 4-digit password twice.

To adjust the picture settings, press the [MENU] key to select the PICTURE menu. Use the [P+] or [P-] key to select the desired function (Brightness, Contrast, Colour, Sharpness, Tint). Use the [V+] or [V-] key to adjust the value. Note that the Tint control will only appear if an NTSC signal is being received.

To set the clock and timer functions, press the [MENU] key to select the TIME menu. Use the [P+] or [P-] key to select the item (CLOCK, ON-TIME, OFF-TIME, SLEEP TIME, or REMIND TIME). Use the [V+] or [V-] key to adjust the minutes and hours. For ON-TIME, OFF-TIME, or REMIND TIME, use the [P+] or [P-] key to select ON PROG and use the [V+] or [V-] key to change the On-Program number. For SLEEP TIME, use the [P+] or [P-] key to select SLEEP TIME and use the [V+] or [V-] key to adjust the sleep timer.

To turn the Auto Volume Level (AVL) on or off, use the [V+] or [V-] key. This will toggle the AVL feature.

If there is no sound, check the following: the power plug is properly inserted into the AC outlet, the main power is turned on, and the volume and sound mute settings. Additionally, ensure that there is no interference from electric appliances, automobiles, motors, or vehicle fluorescence lamps.