Haier 29F9G Operating Instructions Manual

The Haier 29F9G television can store up to 250 programs.

To clean the TV set safely, always pull out the power plug from the AC outlet first. Avoid using benzene, petrol, and other chemicals to clean the cabinet and the screen.

If the TV set is not going to be used for a long time, or there is a severe thunder and lightning storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.

To turn on the TV set, press the power switch button on the front panel. To turn it off, press the same button again.

The TV has several input options including S-Video input, AUDIO/VIDEO input, YUV-DVD component input, and Antenna input. Additionally, there is an AUDIO/VIDEO output for connecting external devices.

To connect a DVD player using component cables, connect the R, G, and B outputs from the DVD player to the corresponding component inputs on the TV. Additionally, connect the audio outputs (W and R) from the DVD player to the audio inputs on the TV.

To adjust the picture settings, press the [MENU] key to select the PICTURE menu. Use the [P+] or [P-] key to select the desired function (Brightness, Contrast, Colour, Sharpness, Tint). Use the [V+] or [V-] key to adjust the value. Note that the Tint control will only appear if an NTSC signal is being received.

To set the clock and timer functions, press the [MENU] key to select the TIME menu. Use the [P+] or [P-] key to select the item (CLOCK, ON-TIME, OFF-TIME, SLEEP TIME, or REMIND TIME). Use the [P+] or [P-] key to select minutes or hours, then use the [V+] or [V-] key to change the values. For ON-TIME, OFF-TIME, or REMIND TIME, use the [P+] or [P-] key to select ON PROG, and use the [V+] or [V-] key to change the On-Program number. For SLEEP TIME, use the [V+] or [V-] key to change the sleep timer duration.

To turn the AVL feature on or off, use the [V+] or [V-] key. This will toggle the AVL feature.

If there is no sound coming from your TV, check the following: ensure the power plug is properly plugged into the AC outlet, the main power is turned on, and the volume is not muted. Additionally, check for any interference from electric appliances such as automobiles, motors, vehicles, or fluorescence lamps. Adjust the contrast, brightness, and volume settings if necessary.