Haier 26T32 User Manual

To avoid you can not enter patriarch s locked setting menu if you forget thepatriarch's locked password, we provide you a super password: 2009. If youforget password, you can input the super password to enter patriarch's lockedsetting menu. In order to prevent your children from knowing this superpassword, please rip off this note and keep it in a safe place after reading it.Thanks!'

/ 26

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

For troubleshooting steps, refer to the 'Simple Troubleshooting' section on page 24 of the manual.

The Haier 26T32 has multiple input ports and can easily switch among the modes. You can use the remote control to select the desired input source and switch between TV and Monitor modes.

The Haier 26T32 TV supports the following video input formats: 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p.

The recommended display mode for the Haier 26T32 is 1360X768@60Hz.

The power consumption of the Haier 26T32 in standby mode is 2W.

The Haier 26T32 operates on AC 100-240V, 60/50Hz.

To connect your computer to the Haier 26T32 using a VGA cord, connect one end of the VGA cord to the output port of your computer (available for both portable or laptop computer), and the other end to the VGA input port on the rear cover of the Haier 26T32.

To connect a DVD player to the Haier 26T32 using a composite cable, connect the VIDEO output of the DVD player to the VIDEO input on the TV, and the AUDIO output of the DVD player to the AUDIO input on the TV.

To adjust the volume, press the VOL+ or VOL- keys on the front panel of the TV. These keys allow you to increase or decrease the volume, and also adjust the analog value under OSD operation.

To change the volume, use the 'Volume' key on the remote control.

Related manuals for Haier 26T32