Haier 24E2000 Service Manual

0SERVICE MANUALLED TV MODEL No. 24E2000It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service aproduct. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Anyattempt to service or repair the product or products dealt with in this service information by anyone else could result inserious injury or death.

/ 49

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

To update the software on your Haier 24E2000, refer to the instructions provided in section 9-3 of the service manual.

If there is no sound or picture on your Haier 24E2000, follow the troubleshooting steps outlined in section 10-3 of the service manual.

The resolution of the Haier 24E2000 monitor is 1360x768 pixels.

To update the software on your Haier 24E2000 TV, insert a USB device containing the software update file into the USB port on the back of the TV. Then, press MENU, followed by 8893 on the remote control to open the Factory Setting menu. Select Software Update (USB) and press OK. The software updating process will start, and a progress bar will be displayed. Once the update is completed, the TV will turn off and on again automatically.

Hotel Mode on the Haier 24E2000 TV allows users to set certain default settings and limit access to certain controls and adjustments. This ensures that settings cannot be altered by other people. For more detailed information on how to use Hotel Mode, refer to the 'Hotel Mode' section on page 40 of the manual.

Related manuals for Haier 24E2000