Haier 21T9G Operating Instructions Manual

If the TV set is not going to be used for a long time, or there is a severe thunder and lightning storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.

To turn on the TV, press the power switch button on the front panel. To turn off the TV, press the power switch button again.

The Haier 21T9G TV offers several input options including S-Video input, AUDIO/VIDEO input, YUV-DVD component input, and Antenna input. Additionally, there is an AUDIO/VIDEO output for connecting external devices.

To connect a DVD player to the Haier 21T9G TV using component cables, connect the DVD player's component outputs (Y, Pb, Pr) to the TV's component inputs (Y, Pb, Pr). Ensure that the DVD player is set to output component video and the TV is set to the corresponding input source.

To change the picture effect, repeatedly push the picture effect key on your remote. The effects will cycle through DYNAMIC, USER, STANDARD, and MILD. The USER setting is the last setting you made.

To adjust the picture settings, press the [MENU] key to select the PICTURE menu. Use the [P+] or [P-] keys to select the desired function (Brightness, Contrast, Colour, Sharpness, Tint). Use the [V+] or [V-] keys to adjust the value. Note that the TINT control will only appear if an NTSC signal is being received.

To set the clock and timer functions, press the [MENU] key to select the TIME menu. Use the [P+] or [P-] keys to select the desired item (CLOCK, ON-TIME, OFF-TIME, SLEEP TIME, or REMIND TIME). Use the [V+] or [V-] keys to adjust the minutes and hours. For ON-TIME, OFF-TIME, or REMIND TIME, use the [P+] or [P-] keys to select ON PROG and use the [V+] or [V-] keys to change the On-Program number. For SLEEP TIME, use the [P+] or [P-] keys to select SLEEP TIME and use the [V+] or [V-] keys to adjust the sleep timer.

To turn the AVL feature on or off, use the [V+] or [V-] key. This will toggle the AVL feature.

If there is no picture on your TV screen, check the following: the power plug is plugged into the AC outlet, the main power is turned on, and the settings for contrast, brightness, and volume are correctly adjusted. Additionally, ensure that the antenna is properly connected and aligned.