HDanywhere MHUB862U Manual

Also see for MHUB: Quick start guide Quick start guide Manual Manual Product guide

HDanywhere MHUB862U Manual Manual pdf 3 page image

3MHUBHD CONNECTIVITY LTD, trading as HDANYWHERE registered in England and Wales. Company No: 06046737 Registered office: Unit 23 Link Business Centre, Link Way, Malvern, Worcestershire, WR14 1UQ. Contact: support@hdanywhere.com Tel: 00441684575324MHUB (8x6+2) REAR CONNECTIONS1. “SOURCE INPUTS” [1-8]: Use to connect HDMI source devices to the MHUB2. HDMI Outputs [A-B]: Connect a display to this port via a HDMI cable3. HDBaseT Outputs [C-H]: Connect your MHUB receivers to these ports via a CAT cable4. “DISPLAY IR (IN)” [A-H]: Connect IR RXs to these ports to control your displays via IR with athird party control system5. “ALL IR (IN)”: Connect an IR RX to this port to send commands to all displays simultaneously6. “HUB IR (IN)”: Connect an IR RX to this port to control your MHUB with the included IR remotecontrol (or other learning remote) whilst in line-of-sight of the IR RX.Or control the MHUB with a third party controller via direct IR, using the optional add-onaccessory called the ‘MHUB IR integration cable’. (1.55.911.001.1)7. “SOURCE IR (OUT)” [1-8]: Connect IR TXs to these ports to control your source devices via IR.The “SOURCE IR” port number corresponds with the source input number8. “AVR IR (OUT)”: If you have an AVR in your system, connect an IR TX to this port and place iton the IR window of your AVR9. Audio Extraction Ports:a. “DIGITAL” Audio: Use this port to extract multi-channel audio via an optical cableb. “STEREO” Audio: Use this port to extract stereo audio via a 3.5mm jack cable10. “HUB CONTROL IP” Port: Connect the MHUB system to your router via this port to enablecontrollability via TCP/IP commands, web GUI access and system control via the uControl App.11. “RS232” Port: Use to integrate your MHUB with a control system via RS23212. AC input: Connect the supplied IEC power cable to this port to provide power to your matrix