HAMPTON BAY 143-011 Manual

HAMPTON BAY 143-011 Manual Manual pdf 2 page image

Page 2Thank you for purchasing this Hampton Bay interior portable luminaire. Thisproduct has been manufactured to the highest standards of safety and quality.The durable finish and shade design provide for care-free maintenance.Simply wipe with a clean towel to keep looking showroom new.FEATURES:1. Durable easy to maintain finish; simply wipe with a clean soft cloth tokeep looking new.2. On-off switch on table and accent lamp. Three-way switch on floor lamp.Provides just the right amount of light where it is needed.3. Popular E27 lamp holder may be fitted with a CFL equivalent energysaving bulb.QUESTIONS, PROBLEMS, MISSING PARTS:Before returning to your local Home Depot, please call our Customer ServiceTeam at 1-877-527-0313 or visit www.homedepot.com. Please reference yourSKU 143-011 3 Piece Coffee Bronze Roomful when speaking to a CustomerService agent.CAUTION:1. Before starting to assemble your portable luminaire, spread all parts out ona clean flat surface. Inspect each part for defects that may have occurredduring shipping.Important: Inspect the wire insulation for any cuts, abrasions or exposedcopper that may have resulted during shipping. If there is a defect in the wire,DO NOT continue the assembly operation. Please call our Customer ServiceTeam at 1-877-527-0313.2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANYELECTRICAL QUESTIONS.3. Keep your receipt and these Instructions for Proof of Purchase.TOOLS REQUIRED FOR ASSEMBLY:1 ea - 40 watt max. type A bulb (or CFL equivalent)1 ea - 60 watt max. type A bulb (or CFL equivalent)1 ea - 100 watt 3-way max. type A bulb (or CFL equivalent)(Bulbs not included)Page 3PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):Parts for Floor:1 ea – Socket Assembly (A) 4 ea – Tube (B,C,DE)1 ea – Base (F) 1 ea – Ring (H) 1 ea – Shade (G)ASSEMBLY INSTRUCTIONS (Floor):1. Screw Socket Assembly (A) clockwise into Tube (B)until secure; pull any excess cord through Tube (B).2. Repeat Step 1 for Tubes (C,D,E).3. Screw Tube (E) clockwise into Base (F) until secure;pull any excess cord through Base (F).4. Place Shade (G) onto Socket Assembly (A). Secure byscrewing Ring (H) clockwise onto threaded socket.5. Install 100-watt maximum 3-way Type A (or CFLequivalent) bulb into Socket Assembly (A).Parts for Table and Accent:2 ea - Socket 2 ea - Tube (B) 2 ea - Base (C) 2 ea - Shade (D)Assembly (A)ASSEMBLY INSTRUCTIONS (Table and Accent):1. Screw Socket Assembly (A) clockwise into Tube (B)until secure; pull any excess cord through Tube (B).2. Screw Tube (B) clockwise into Base (C) until secure;pull any excess cord through Base (C).3. Place Shade (D) onto Socket Assembly (A).4. Install 60-watt (Table) or 40-watt (Accent) maximumType A (or CFL equivalent) bulb into Socket Assembly(A).