H3C SR6600 SPE-FWM Manual

Also see for SR6600 SPE-FWM: Configuration guide Configuration guide Configuration guide Command reference Command reference

H3C SR6600 SPE-FWM Manual Manual pdf 2 page image

Manual version: 6PW102-20141219 BOM: 3123A137iiTable 1 Card specificationsItem SpecificationCF card One CF card slot, 256MB by default for the external CF card256 MB, 512 MB, or 1 GB for an optional external CF cardDimensions (H × W × D) 45 × 399 × 412 mm (1.77 × 15.71 × 16.22 in)Hot swapping SupportedPorts• 1 console port• 2 USB ports (reserved for future use)• 2 pairs of combo ports, each pair containing the following ports:{ 1 x 10/100/1000BASE-T copper port{ 1 x 1000BASE-X SFP fiber portYou can use the combo enable { copper | fiber } command to activate either ofthe ports in a pair. By default, the copper combo port is activated.Ambient temperature • Operating: 0°C to 45°C (32°F to 113°F)• Not operating: –40°C to +70°C (–40°F to +158°F)Ambient relative humidity • Operating: 10% to 95%, noncondensing• Non-operating: 5% to 95%, noncondensingCompatible device models H3C SR6600 routersSystem software version See the release notes that come with the card.Table 2 Console port specificationsItem SpecificationConnector RJ-45Interface standard RS-232Transmission baud rate 9600 bps (default) to 115200 bpsTransmission medium Asynchronous serial cableTransmission distance ≤15 m (49.21 ft)Services• Provides connection to an ASCII terminal.• Provides connection to the serial port of a local or remote PC (through apair of modems) that is running a terminal emulation program.• Supports command line interface (CLI).Table 3 10/100/1000BASE-T copper port specificationsItem SpecificationConnector RJ-45Interface standard 802.3, 802.3u, and 802.3abInterface type MDI/MDIX autosensingSupported cable Category-5 (or above) twisted pair cableTransmission distance 100 m (328.08 ft)

/ 5

Related manuals for H3C SR6600 SPE-FWM