Gateway 7250R Rack Mounting Instructions

Also see for 7250R: System manual

Contents

Gateway 7250R Rack Mounting Instructions Manual pdf 11 page image

6 InstallationTo install the generic mounting brackets in the cabinet:1 If you received a mounting template with your cabinet, use it to locatethe exact position of the cabinet mounting brackets.2 Position the front mounting bracket (shorter bracket) on the front verticalmounting rail.3 Attach the front mounting bracket to the front vertical mounting railusing two screws from the accessory kit.If screw holes in the front vertical mounting rail are not threaded, attachthe front mounting bracket by using the screws and bar nut from theaccessory kit.4 Position the back mounting bracket (longer bracket) on the back verticalmounting rail.5 Attach the back mounting bracket to the back vertical mounting railusing two screws from the accessory kit.If screw holes in the back vertical mounting rail are not threaded, attachthe back mounting bracket by using the screws and bar nut from theaccessory kit.6 Mount the second set of brackets on the opposite side of the cabinet byrepeating Steps 2 through 5.Back mountingbracketBar nutsFront mountingbracket