2 GTM 11 Owner’s ManualC ONNECTING THE GTM 11C ONNECTING THE GTM 11What’s Included• GTM 11 with LED and mini-USB plug• Whip antenna (stiff antenna)• Wire antenna (flexible wire antenna)• Hook-and-loop fasteners• Double-sided tapeStep 1: Snap the antenna on the GTM 11You can use either the whip or wire antenna for your GTM 11. Use thetraditional whip antenna for most installations. If you want to completelyhide your GTM 11, use the wire antenna. Also, use the wire antenna if thewhip antenna does not get an adequate signal strength.1. Align the tab on the antenna with the front of the GTM 11.AntennaGTM 11LEDTab2. Snap the antenna onto the connector on the GTM 11. Theantenna clicks indicating it is locked in place. You might have towiggle it a bit to properly get it to click.To remove the antenna from the GTM 11, press the antenna connector’stab. Pull the antenna off the GTM 11.Step 2: Connect the GTM 11 to your GPSdeviceConnect the mini-USB plug on the GTM 11 cable into the mini-USBconnector on your Garmin GPS device.mini-USBplugStep 3: Connect your Garmin GPS to externalpowerConnect your GPS device to external power. Turn the GPS device on, if itdoes not turn on automatically.NOTE: When using the GTM 11, your Garmin GPS device must beconnected to external power.