INSTRUCTIONWARNING AND CAUTIONPLEASE READ BEFORE OPERATIONWhile reading your manual, please pay close attention to areas labeled:WARNING AND CAUTION.The description of each is found below.WARNINGWarnings are given where failure to observe instruction could resultin injury or death to people.CAUTIONCautions are found where failure to observe the instruction could resultin damage to the equipment, associated equipment and process.These units confirm to the SI International system of units of measurement.The following symbols (with recommendation of IEC1010 ) of warning will be found on the pump.Caution - refer to accompanying documentsCaution - risk of electrical shockCaution - hot surfaceWARNINGMotor includes a self resetting thermal cutout and the pump couldrestart without actuation under fault condition.2