Doc. No. 503-0800ZE-M-01 ZP3-ECU Maintenance ManualPage ii Issue 1 (01/08/2006)Copyright © 2006, GE Security B.V. All rights reserved.This document may not be copied or otherwise reproduced, in whole or in part, except as specifically permitted underUS and international copyright law, without the prior written consent from GE.Document number/revision: 503-0800ZE-M-01 (August 2006)THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. GE ASSUMES NO RESPONSIBILITYFOR INACCURACIES OR OMISSIONS AND SPECIFICALLY DISCLAIMS ANY LIABILITIES, LOSSES, OR RISKS, PERSONAL OROTHERWISE, INCURRED AS A CONSEQUENCE, DIRECTLY OR INDIRECTLY, OF THE USE OR APPLICATION OF ANY OF THECONTENTS OF THIS DOCUMENT. FOR THE LATEST DOCUMENTATION, CONTACT YOUR LOCAL SUPPLIER OR VISIT USONLINE AT WWW.GESECURITY.NET.This publication may contain examples of screen captures and reports used in daily operations. Examples may includefictitious names of individuals and companies. Any similarity to names and addresses of actual businesses or personsis entirely coincidental.GE and the GE monogram are registered trademarks of General Electric.This product and logo are registered trademarks of GE Security.Other trade names used in this document may be trademarks or registered trademarks of the manufacturers orvendors of the respective products.Use this product only for the purpose it was designed for; refer to the data sheet and user documentation. For thelatest product information, contact your local supplier or visit us online at www.gesecurity.net.The European directive “Waste Electrical and Electronic Equipment” (WEEE) aims to minimise the impact of electricaland electronic equipment waste on the environment and human health. To conform with this directive, electricalequipment marked with this symbol must not be disposed of in European public disposal systems.European users of electrical equipment must now return end-of-life equipment for disposal.Further information can be found on the following website: http://www.recyclethis.info/.