GE JVW5361 Installation Instructions Manual

Also see for JVW5301, JVW5361: Owner's manual Installation instructions Owner's manual Installation instructions Owner's manual

Contents

GE JVW5361 Installation Instructions Manual Manual pdf 4 page image

4 31-10983-4REMOVE THE PACKAGINGCAUTION: Wear gloves to protectagainst sharp edges.• Remove the duct covers.• Remove the hardware bag, literature packageand other boxed parts.• Remove and properly discard the protectiveplastic wrapping and other packaging materials.TOOLS AND MATERIALS REQUIRED(NOT SUPPLIED)Wire cutter/stripperSpirit levelAluminizedDuct tapeSafety glassesStrain relief forjunction boxElectric drill, #2 Phillips,flat head, and 9/32" drill bitUL listed wire nutsPencil and tape measurePLAN THE INSTALLATIONCAUTION: To reduce risk of fire and toproperly exhaust air, be sure to duct the airoutside – Do not vent exhaust air into spaceswithin walls or ceilings or into attics, crawl spaces,or garages.PARTS SUPPLIED FOR INSTALLATION• 1 Hardware Package• 1 Literature PackagePARTS NEEDED FOR INSTALLATION• 1 Strain Relief• Power Supply Cable• 1 Wall or Roof Cap (for external venting only)• All Metal Ductwork (for external venting only)• Recirculation Duct (for recirculation install only)WARNING:PERSONAL INJURY HAZARDBecause of the weight and size of the range hoodcanopy. It is recommended that 2 people are usedto install the range hood. Failure to properly liftrange hood could result in damage to the productor personal injury.NOTE: This range hood can be installed as eitherducted or recirculation. In a ducted application,this range hood can be vented through the wall orceiling. When installed for recirculation, the rangehood vents out the sides of the duct cover.NOTE: Before making any cuts or holes forinstallation, determine which venting method willbe used and carefully calculate all measurements.INSTALLATION PREPARATION Installation Preparation