GE JBP48 Owner's Manual

Also see for JBP48: Owner's manual Owner's manual Owner's manual Installation instructions Installation instructions

Contents

GE JBP48 Owner's Manual Manual pdf 24 page image

24Customer Service Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsBefore You Call For Service…Troubleshooting TipsProblemPossible CausesWhat To DoControl signals after You forgot to enter • Press theBAKE pad and desired temperature or theentering cooking time a bake temperatureSELF CLEAN pad and desired clean time.or delay start or cleaning time.Clock and timer A fuse in your home may • Replace the fuse or reset the circuit breaker.do not work be blown or the circuitbreaker tripped.Oven controls • See theUsing the clock and timer section.improperly set.Oven light does Light bulb is loose • Tighten or replace the bulb.not work or defective.Switch operating light • Call for service.is broken.Oven temperature Oven thermostat • See theAdjust the oven thermostat—Do it yourself!too hot or too cold needs adjustment. section.Oven will not work A fuse in your home may • Replace the fuse or reset the circuit breaker.be blown or the circuitbreaker tripped.Oven controls • See theUsing the oven section.improperly set.Oven will not Oven controls • See theUsing the self-cleaning oven section.self-clean improperly set.“Crackling” or This is the sound of the • This is normal.“popping” sound metal heating and coolingduring both the cooking andcleaning functions.Excessive smoking Excessive soil. • Press theCLEAR/OFF pad. Open the windows torid the room of smoke. Wait until theLOCKED DOORlight goes off. Wipe up the excess soil and reset theclean cycle.Oven door will not Oven too hot. • Allow the oven to cool below locking temperature.open after aclean cycleOven not clean The oven temperature is • All the range to cool to room temperature andafter a clean cycle too high to set a self-clean reset the controls.operation.Oven controls not • See theUsing the self-cleaning oven section.properly set.Oven was heavily soiled. • Clean up heavy spillovers before starting the cleancycle. Heavily soiled ovens may need to self-cleanagain or for a longer period of time.