Safety Instructions Operating InstructionsSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Customer ServiceHow to Set the Oven for Convection Roasting when Using the Probe(on some models)The display will flashPROBE and the ovencontrol will signal if the probe is insertedinto the outlet, and you have not set aprobe temperature and touched theSTART pad.Place the shelf in the lowest position(A). Insert the probe into the food.Plug the probe into the outlet in theoven. Make sure it is pushed all theway in. Close the oven door.Touch theCONVECTION ROAST pad.Touch the number pads to set thedesired oven temperature.Touch thePROBE pad.Touch the number pads to set thedesired internal food temperature.To change the oven temperature duringthe Convection Roast cycle, touch theCONVECTION ROAST pad and then touchthe number pads to set the new desiredtemperature.Touch theSTART pad.When the oven starts to heat, the wordLO will be in the display.After the internal temperature of thefood reaches 100°F., the changinginternal temperature will be shown inthe display.When the internal temperature ofthe food reaches the number youhave set, the probe and the oventurn off and the oven control signals.To stop the signal, touch theCLEAR/OFF pad. Use hot pads toremove the probe from the food.Do not use tongs to pull on it—they might damage it.CAUTION: To prevent possible burns, donot unplug the probe from the oven outletuntil the oven has cooled. Do not store theprobe in the oven.NOTE:n If the probe is removed from the foodbefore the final temperature isreached, a tone will sound and thedisplay will flash until the probe isremoved from the oven.n You will hear a fan while cooking withthis feature. The fan will stop when thedoor is opened but the heat will notturn off.n You can use the timer even though youcannot use timed oven operationswhile using the probe.For best results when roasting largeturkeys and roasts, we recommendusing the probe included in theconvection oven.21