Fast Mover FT1075 Product Instruction Manual

Fast Mover FT1075 Product Instruction Manual Manual pdf 2 page image

Tool UseThis Air Operated Dual Action Sander isdesigned for the purpose of sanding avariety of coatings from steel, wood,plastics, etc.FT1075Instruction ManualFast Mover Tools LtdT: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.comwww.fastmovertoolsuk.comIMPORTANTPlease read through this Manual carefully before using the FT1075.This tool must only be used for sanding and within the parametersoutined in this manual. All users of the equipment should be trained inany risks associated with the products they are sanding or using asfinishing aids.SpecificationPad Diameter 3”/75mmPad Thread Size 1/4"-20TFree Speed 11,000RPMMinimum Pad Speed 13,200RPMMaximum Pressure 90Psi/6.3PSIAir Consumption 11CFMAir Inlet 1/4” BSPVibration Level 0.07m/s2Noise Level 86dB(A)Weight 656gLength 180mmSafety InstructionsThese instructions are intended as a guide to the correct use of this equipment. The process ormaterials being sanded may have risk characteristics requiring additional safety measures andthese must be identified by the user. All users of this sander must be thoroughly acquainted withthis manual.Before Use and Before Using Tool for the First Time- Make sure you have the relevant Personal Protection Equipment (PPE).Hand ProtectionThe pad revolves at high speed and may cause damage if bought into contact withexposed flesh. The workpiece and the pad may also get hot after prolonged use. Handprotection must be strong enough to protect the skin and be a good fit and have no looseparts that may get caught in rotating parts.Determination of the test results includes consideration of measurementuncertainty from the test equipment and methods.This model features centralvacuum dust extraction